Setup CyberMax LCD, Antenna and Other Questions

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
manuko
New registered user
New registered user
Posts: 15
Joined: Tue Mar 16, 2004 5:47 pm
Location: Guayaquil - Ecuador
Contact:

Setup CyberMax LCD, Antenna and Other Questions

Post by manuko »

I have several questions, desire helps:
1. - I will work in 87.7Mhz, is necessary to apply what the Manual says" Operating close to 88MHz sometimes requires that you add a 10pF capacitor inparallel with the C19 (close to the final) I know no much of electronica, somebody would explain to me since I do it?
2.- (Antenna) the element slide chart that shows how to adjust, is it showing that full extention at 1002mm is 87.7Mhz. But 900mm is 88mhz range (full extension of element). Please help, work in 900mm?? Thanks.
3.- I am making test transmissions. The equipment shows in the screen: 0-VOC Low/OK. He is correct? That other messages present in the screen?
4.- In SETUP of CyberMax LDC It does not appear TUNE-UP, Is normal?

Opps Sorry my English!!!


Thanks
Manuko Larrea
Radio Magica FM
www.radiomagica.8m.com
Ecuador - Suramerica
Manuko Larrea
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

1.) This just means that by adding this capacitor you can tweak the
transmitter to produce even more power. It is not required.

2.) This is best erified with SWR meter, it will tell you precisely
when antenna length is perfect.

3.) It is OK to see this in the TEST menu mode.

4.) ? Not sure what you mean, but you can send
me an email with more details and I will help!
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply