Hello everyone!
Here in NZ, one of my clients has just finished submitting a Tx based on the MAX PRO-1 module for technical testing. The unit passed, with excellent results, spurs and harmonics better then -55dB down.
This module i brought as a ready made module from PCS, saving me the assembly time.
The output power was measured on our HF CRO scope that has a digital RF power meter on it, reading 7.5W of power at 13.8v DC!!!
Most excellent - and this is 7.5W is clean watts too!!!
G.
MAX PRO-1 passes radio tests in NZ...
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Shouldn't be..Keep this under close wraps..Did a few easy mods...replaced T2 with a higher gain tranny..isolated the dc feed to the SC1971,change a few base-shunt components... And fed it with 15volts,but supplied the rest of the M1P at 13.5v.Added a bit of forced air circulation to keep the 1971 "Kool".
Wanna hear some more?? how 'bout 13watts without too much of a major modidfication,all on the same board???Are you drooling yet?
Let me know when i can continue
StormiNorm.:roll:p:razz
I see you are up to your old tricks again...FTP ON PORT 21...Kewl...shall return the greetings
Yo Mr. Grogster,
Just out of curiosity,have you had a peek at the construction Jpegs i have posted on the "Piktur" site?...If you haven't may i suggest that you take a look,and please feel free to provide us with some feedback as th your thoughts on the evovlement of the Max1pro?.
StormiNorm...
P:S trust i am forceing you to swallow your pride
<font size=-1>[ This Message was edited by: StormiNorm on 2002-09-10 02:44 ]</font>
Just out of curiosity,have you had a peek at the construction Jpegs i have posted on the "Piktur" site?...If you haven't may i suggest that you take a look,and please feel free to provide us with some feedback as th your thoughts on the evovlement of the Max1pro?.
StormiNorm...
P:S trust i am forceing you to swallow your pride
<font size=-1>[ This Message was edited by: StormiNorm on 2002-09-10 02:44 ]</font>
Gidday!
Been away for a while, and only just got around to looking back in here.
StormiNorm: 13 watts sounds pretty impressive - yes, I am drooling. What about spurious and harmonics at this power? Are they still O.K.?
Can you indicate exactly what it is you want me to do or comment on please.
I do no understand what you mean.
Can you provide a link to this site with the JPEGS and or other details you want me to look and.
Thanks!
G.
Been away for a while, and only just got around to looking back in here.
StormiNorm: 13 watts sounds pretty impressive - yes, I am drooling. What about spurious and harmonics at this power? Are they still O.K.?
Can you indicate exactly what it is you want me to do or comment on please.
I do no understand what you mean.
Can you provide a link to this site with the JPEGS and or other details you want me to look and.
Thanks!
G.