RF Power AMP
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
RF Power AMP
Hi
I am looking to amp my 1w FM transmitter to 40w+, i want to use the pcb from pcs and also the digram but its a bit unclear. I would be greaful if someone could give me a component list and a modded diagram to show where they go.
Thanks
I am looking to amp my 1w FM transmitter to 40w+, i want to use the pcb from pcs and also the digram but its a bit unclear. I would be greaful if someone could give me a component list and a modded diagram to show where they go.
Thanks
You'll have to improvise a little.
Its a fairly simple diagram and it is not strictly
important where certain component goes on the PCB, but make
sure you stick to the diagram.
Think of it as a breadboard for RF amps. Handy to keep around
for testing RF amps and transistors.
Its a fairly simple diagram and it is not strictly
important where certain component goes on the PCB, but make
sure you stick to the diagram.
Think of it as a breadboard for RF amps. Handy to keep around
for testing RF amps and transistors.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
I fear you do not know enough about the basicy for this circuit.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
If you don't know that 10p means 10pF you obviously
don't have much experience, if any.
4/20 is a trimmer, 4-20pF.
don't have much experience, if any.
4/20 is a trimmer, 4-20pF.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
If 10p means 10pF then why not put 10pf on the diagram? I have quite a bit of experience in building circuits as i can read and follow instructions.
The digram on the site only gives very vague idea.
However, bearing in mind what you have said i will have a go at building the amp and let you know what happens.
Thanks for the reply
BTW 10p = £0.10 where i come from
The digram on the site only gives very vague idea.
However, bearing in mind what you have said i will have a go at building the amp and let you know what happens.
Thanks for the reply
BTW 10p = £0.10 where i come from
Why not put 10 pence in there than and see what happens?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Let me know if you have any more problems.
I think we're clear for now, no?
Have fun!
Marko
I think we're clear for now, no?
Have fun!
Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128