PCS Electronics PCS Electronics - home page PCS Electronics  
RegisterSearchFAQAM & FM Radio transmitters shop UsergroupsLog in
max pro I with lcd which is the power??

 
Reply to topic    PCS-Electronics Forum Index » FM transmitters View previous topic
View next topic
max pro I with lcd which is the power??
Author Message
mauros69
New registered user
New registered user


Joined: 01 Dec 2003
Posts: 2

Post max pro I with lcd which is the power?? Reply with quote
Well I'm a dummies maybe...
I need help ....I build all antenna,tx and I check
all with a watt meter swr
I use 14.0 v cc 0.8 amp assorbed
or a lead acid battery ( 12 volt)
the result is same...
My swr is less than 1.3
Watt ...is ONLY 2 watt.I can't get more..
I,of course, regulated for max power and ( set up all correctly with the lcd section set up )
My frequency is 90.00 mhz approximately.
All function well but....
I get only 2 watt
I use a gp antenna hand made... I'm sure for swr ...!
Please tell me... Maybe I need change the final transistor..??
Mon Dec 01, 2003 8:38 pm View user's profile Send private message
pcs
Site master
Site master


Joined: 18 Jan 2002
Posts: 3063
Location: Radio Land

Post Reply with quote
Increase supply voltage to 15V.

_________________
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Mon Dec 01, 2003 9:05 pm View user's profile Send private message Visit poster's website
mauros69
New registered user
New registered user


Joined: 01 Dec 2003
Posts: 2

Post Reply with quote
[/b] Hi Marko and all users..
I tried to use 15 volt and tune for the lowest.. ; - )
but no more power is in.
I have a question for you...
If I can change frequency ( up to 106 mhz) maybe I can have more power?
This is bcs I read in manual that is possible have low power to 87 to 90 mhz..
What I need is 4 or 5 watts..I can get this by max pro I with lcd..? Maybe is new version bcs I buyng october 03 the unit.

By the way ,I'm surprised this small tx have a VERY clear signal..
no problem for interference .Have a GOOD stability I check
before and after 10 hours work,with a frg 9600 and change only 15 20 Khz..So users,buyng max pro I with lcd ..have a VERY GOOD STABILITY AND CLEAR signal..
Thu Dec 04, 2003 8:05 pm View user's profile Send private message
Display posts from previous:    
Reply to topic    PCS-Electronics Forum Index » FM transmitters All times are GMT + 1 Hour
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group