MAXPRO2015+ V3 resetting when connected to LCD
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
MAXPRO2015+ V3 resetting when connected to LCD
Hello,
I've recently bought an MAXPRO2015+ V3 Transmitter with LCD and IO Board. When the LCD is plugged in to the main board this happens: https://youtu.be/i5Sr0Un6RLM
It just keeps on on resetting on and on. It also produces no output signal.
When it is disconnected everything works fine.
The power supply is rated for 12V 16A.
I've recently bought an MAXPRO2015+ V3 Transmitter with LCD and IO Board. When the LCD is plugged in to the main board this happens: https://youtu.be/i5Sr0Un6RLM
It just keeps on on resetting on and on. It also produces no output signal.
When it is disconnected everything works fine.
The power supply is rated for 12V 16A.
Did you connect the IO board to stereo encoder port instead of the LCD?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
It is now, but have you at any time connected it to RF board?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
It is probably damaged now due to this mis-connection.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
The problem you have is an indication that is was damaged by exactly this error (connecting to wrong port).
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
MAXPRO2015+ V3 resetting when connected to LCD
I will email you directly...
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
So, your replacement chips arrived today.
I replaced the MEGA64 with the new one you provided.
The transmitter now powers on without a problem, but the LCD only shows squares.
Here's a picture: https://puu.sh/s1GHB.jpg
I replaced the MEGA64 with the new one you provided.
The transmitter now powers on without a problem, but the LCD only shows squares.
Here's a picture: https://puu.sh/s1GHB.jpg
E-mail me the photo of the LCD, maybe the LCD is another model. In that case I may have to send you a different firmware.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128