Author |
Message |
xenoid
New registered user

Joined: 30 Sep 2016 Posts: 6
|
|
MAXPRO2015+ V3 resetting when connected to LCD |
|
Hello,
I've recently bought an MAXPRO2015+ V3 Transmitter with LCD and IO Board. When the LCD is plugged in to the main board this happens: https://youtu.be/i5Sr0Un6RLM
It just keeps on on resetting on and on. It also produces no output signal.
When it is disconnected everything works fine.
The power supply is rated for 12V 16A.
|
|
Sat Oct 01, 2016 12:04 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3092 Location: Radio Land |
|
|
|
Did you connect the IO board to stereo encoder port instead of the LCD?
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Thu Oct 06, 2016 9:04 am |
|
 |
xenoid
New registered user

Joined: 30 Sep 2016 Posts: 6
|
|
|
|
The IO board is connected directly to the LCD board.
Even with the IO board disconnected it doesn't work.
|
|
Thu Oct 06, 2016 9:29 am |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3092 Location: Radio Land |
|
|
|
It is now, but have you at any time connected it to RF board?
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Thu Oct 06, 2016 1:24 pm |
|
 |
xenoid
New registered user

Joined: 30 Sep 2016 Posts: 6
|
|
|
|
Actually it could have happened.
But why isn't the LCD board working on its own?
|
|
Thu Oct 06, 2016 5:39 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3092 Location: Radio Land |
|
|
|
It is probably damaged now due to this mis-connection.
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Fri Oct 07, 2016 9:12 am |
|
 |
xenoid
New registered user

Joined: 30 Sep 2016 Posts: 6
|
|
|
|
Ok, is there any way to check if it is actually damaged?
|
|
Fri Oct 07, 2016 5:15 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3092 Location: Radio Land |
|
|
|
The problem you have is an indication that is was damaged by exactly this error (connecting to wrong port).
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Mon Oct 10, 2016 10:33 am |
|
 |
xenoid
New registered user

Joined: 30 Sep 2016 Posts: 6
|
|
|
|
Are there any replacement parts?
|
|
Mon Oct 10, 2016 4:34 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3092 Location: Radio Land |
|
MAXPRO2015+ V3 resetting when connected to LCD |
|
I will email you directly...
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Tue Oct 11, 2016 12:40 pm |
|
 |
xenoid
New registered user

Joined: 30 Sep 2016 Posts: 6
|
|
|
|
So, your replacement chips arrived today.
I replaced the MEGA64 with the new one you provided.
The transmitter now powers on without a problem, but the LCD only shows squares.
Here's a picture: https://puu.sh/s1GHB.jpg
|
|
Mon Oct 31, 2016 1:25 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3092 Location: Radio Land |
|
|
|
E-mail me the photo of the LCD, maybe the LCD is another model. In that case I may have to send you a different firmware.
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Wed Nov 02, 2016 11:48 am |
|
 |
|