Author |
Message |
nickone
New registered user

Joined: 03 Dec 2013 Posts: 4
|
|
max pro 2015 |
|
hi -
im running a new maxpro 2015 and its in a metal enclosure but getting pretty warm - im just wondering if you can tell me where the fan connects - it says in the manual it has pads for this - i cannot see them on the board..
thanks
|
|
Thu Jan 22, 2015 7:11 pm |
|
 |
pcs
Site master


Joined: 18 Jan 2002 Posts: 3099 Location: Radio Land |
|
|
|
Hi,
that part of the manual was copy-pasted from max pro 3000 which has dedicated pads.
The 2015 does not, but it is not really a problem, all you need to do is connect the fan to +15V (power supply).
A small 40x40 12V fan will do, make it blow across the final.
Larger fan is ok as well. A larger fan does not need to blow that strong so it can be connected to on-board 7809 making it silent.
Otherwise everything ok?
_________________ Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128 |
|
Fri Jan 23, 2015 1:20 am |
|
 |
nickone
New registered user

Joined: 03 Dec 2013 Posts: 4
|
|
|
|
yes all good - thanks - i have it running on 13v and had the fan connected to that - but it was a bit loud and powerfull.. so i will try of the 7809 as you say.. apart from that all good - at 15 v it puts out 19w.. at 13v im hitting 15w..
many thanks
|
|
Fri Jan 23, 2015 6:50 pm |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|