PCIMAX 2007 3% TO 7% HOW TO

All posts related to PCI MAX transmittors go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
radiocity1028
New registered user
New registered user
Posts: 3
Joined: Thu Oct 20, 2011 8:34 pm

PCIMAX 2007 3% TO 7% HOW TO

Post by radiocity1028 »

PCIMAX 2007 HOW TO MOVE THE STEREO pilots from 3% to 7% NOW IN THERE ANY PLAN MEASUREMENT AND I HAVE MADE MY SHOWS 3% AND I WANT TO UPLOAD THE ABOVE change anything on the board PLEASANT WAIT ANSWER
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Looks like your caps lock key is stuck :)

First, are you sure your stereo pilot is too low?

Second, email me directly and I'll make you a pdf showing where to change a resistor.

Third, it is really time to upgrade to PCIMAX 3000+.
The difference between the two boards is really huge and it is really worth the upgrade.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
radiocity1028
New registered user
New registered user
Posts: 3
Joined: Thu Oct 20, 2011 8:34 pm

radiocity1028

Post by radiocity1028 »

radiocity1028
New registered user
New registered user
Posts: 3
Joined: Thu Oct 20, 2011 8:34 pm

Re: radiocity1028

Post by radiocity1028 »

sen me a pdf how change a resistor my email is radiocityfm1028@gmail.com
berrall
Regular poster
Regular poster
Posts: 30
Joined: Thu Oct 14, 2010 1:49 am

Post by berrall »

Added a 330k in parallal with the existing one on my card and it brought the pilet level to 6.6khz (9%). Before the change the level was at 4.5khz and was having trouble with one of my tuners dropping to mono occasionally.
Post Reply