cyber max fm 40 Repair Amp

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
eduardi
Regular poster
Regular poster
Posts: 20
Joined: Mon Jan 24, 2005 5:30 pm

cyber max fm 40 Repair Amp

Post by eduardi »

I have pcs-electonics cyber max fm 40 , and i need repair BW Broadcast 20/40 amp module, but dont say the T1 and T2 transistor name, i need help.

tanks

can see images:

Image

Image
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

The manufacturer of these amps has deleted the markings,
we do not have them and we do not know what they are.

This amp has also been discontinued by the manufacturer
several years ago, we are also using new type in our amps
for some 3 years at least.

Check our new 50W amplifier and use this one instead.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
eduardi
Regular poster
Regular poster
Posts: 20
Joined: Mon Jan 24, 2005 5:30 pm

Post by eduardi »

Hello Marko, i think the 50W FM pallet amplifier with 24V LDMOS, is not compatible, the Drive power required: < 100mW , and my unit is regulated, i don´t say the minimal.
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

You'd have to send the unit back for service Im afraid anyway.

Or upgrade to new unit since yours is quite old.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
eduardi
Regular poster
Regular poster
Posts: 20
Joined: Mon Jan 24, 2005 5:30 pm

Post by eduardi »

It is very expensive to send the unit there, only need to replace the amplifier, some compatible, which changes viable.
Post Reply