LCD not working with PCI3000+
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
LCD not working with PCI3000+
Hi,
I just had my LCD and not working with my PCI3000+. It displays "LED VU METER" only. It nothing happens. Over a wire connector should be connected to the power supply? It is off the display connector.
Thank to help me
I just had my LCD and not working with my PCI3000+. It displays "LED VU METER" only. It nothing happens. Over a wire connector should be connected to the power supply? It is off the display connector.
Thank to help me
Are you using LCD from old pcimax 2007 or new lcd for pcimax 3000?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
2 pictures of new LCD control bought here i've just receive : http://www.pcs-electronics.com/3000-acc ... p-831.html
http://i.imgur.com/pT2Ry.jpg
http://i.imgur.com/dwmTS.jpg
http://i.imgur.com/pT2Ry.jpg
http://i.imgur.com/dwmTS.jpg
It is possible that the LCD is broken, does the card work in the PC?
Separate wire for supply was done since LCD was creating a bit of noise
so it is better to connect LCD directly to 12V.
Separate wire for supply was done since LCD was creating a bit of noise
so it is better to connect LCD directly to 12V.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
yes, the card works perfectly, settings power, frequency, temp, version, RDS data it's ok with USB to pc. All is ok, not the LCD.
Okay for the separate wire but it is nowhere stated that it is necessary to connect the LCD on the 12V unless I am mistaken. I was afraid not seeing the LCD light up before understanding the use of the separate wire...
So back to my problem, it is possible that it is broken but why? It is new and out of the package. What can I do? You return it? What address?
Could this be from the MAX3000 card ? I do not think I did a bad manipulation...I hope we will find a solution
Okay for the separate wire but it is nowhere stated that it is necessary to connect the LCD on the 12V unless I am mistaken. I was afraid not seeing the LCD light up before understanding the use of the separate wire...
So back to my problem, it is possible that it is broken but why? It is new and out of the package. What can I do? You return it? What address?
Could this be from the MAX3000 card ? I do not think I did a bad manipulation...I hope we will find a solution
I'm sorry, the timing is extremely bad, tomorrow I leave for 2 weeks,
taking some time back.
You can send the LCD back so we can check it out for you, you know
the address.
Yes, we should add some stuff to the manual, I agree.
By the way, all those who are waiting for their pcimax 3000 now
will have to wait 2 more weeks. But they will receive revision 2.0
which is a little bit better so it will not be waiting for nothing
taking some time back.
You can send the LCD back so we can check it out for you, you know
the address.
Yes, we should add some stuff to the manual, I agree.
By the way, all those who are waiting for their pcimax 3000 now
will have to wait 2 more weeks. But they will receive revision 2.0
which is a little bit better so it will not be waiting for nothing
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
I strongly question about i ² C between the LCD and pcimax 3000+
it's normal that the pin 25 (SCL) of μC card max3000, I have a resistance of only 14 ohms, or it is grounded ? I have zero resistance between the ground and the pin 26 (SDA).
Without the max 3000, I ² C signal is generated by the LCD, however, the clock is 0 initial, up to 5V correctly, while the initial data are 5V to down at 0 correctly too.
Once the LCD plugged into the card MAX3000, the SDA signal is ok, and arrives at the μC on the card. BUT not the SCL signal, it is as directly connected to ground. In my opinion it can not work without clock signal. I question the μC my card or you've made a change between the LCD and card MAX3000 but suddenly, no longer compatible and the other one.
Thank you for reading until the end
it's normal that the pin 25 (SCL) of μC card max3000, I have a resistance of only 14 ohms, or it is grounded ? I have zero resistance between the ground and the pin 26 (SDA).
Without the max 3000, I ² C signal is generated by the LCD, however, the clock is 0 initial, up to 5V correctly, while the initial data are 5V to down at 0 correctly too.
Once the LCD plugged into the card MAX3000, the SDA signal is ok, and arrives at the μC on the card. BUT not the SCL signal, it is as directly connected to ground. In my opinion it can not work without clock signal. I question the μC my card or you've made a change between the LCD and card MAX3000 but suddenly, no longer compatible and the other one.
Thank you for reading until the end