PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Topp » Katalog » Special sale items » Min konto  |  Handlekurv  |  Sjekk ut   
Våre produkter
FM transmitters->
AM transmitters
Special sale items
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Electronic components->
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcast->
RF service and design
Hva er nytt?
Basic Studio (mixer and microphone)
Basic Studio (mixer and microphone)
Våre radioguider
Hvordan starte guide
Making Your Own Transmitter
Nye skjema
Anbefalt lesning
Om PCS Electronics
Forsendelse & Retur
Tilgjengelig på lager
Kontakt oss
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Gavekort FAQ

PayPal and credit cards accepted!
PC oscilloscopes PoScope from PoLabs  

We stock the new PoScope Mega!

These incredibly practical USB based instruments (requires a PC) work as an oscilloscope, spectrum analyzer, logic generator and protocol analyzer and comes with powerfull windows software with a wide selection of functions.

Here are the drivers and manual.

What is included in PoScope Basic2 bundle version:
- 1 PoScope Basic2
- 2 PoProbe60 (60MHz oscilloscope probe)
- 1 PoProbeL2
- 1 USB cable
- 1 CD with software and manual

What is included in PoScope Basic2:
- 1 PoScope Basic2
- 1 USB cable
- 1 CD with software and manual

Following operation modes are supported by PoScope Basic2:
- 2-channel oscilloscope (marker measurements, triggering (absolute, differential, external) and adjustable pretrigger, signal voltage and frequency measurement, filtering, etc.).
- 2-channel spectrum analyzer (marker measurements, klirr-factor measurement, different window functions, filtering, etc.).
- 2-channel recorder (marker measurements, option to add 99 markers with comments, maximal, minimal and average voltage measurement for each channel, waveform record within several tens of hours, etc.).
- 16 (8)-channel logical analyzer (marker measurements, triggering (edge, level, mask) and adjustable pretrigger, external clocking (triggering), preset pulse miss, preset bit sequence/edge, decoding of the interface UART, SPI, I2C, 1-Wire, etc.).
- 8-channel logical generator(tabular waveform formatting or direct timing chart plotting with mouse on the screen, etc.).

In addition, USB PoScope Basic2 oscilloscope ensures as follows:
- Add the comments to each measurement (to be recorded in the file with measurement results)
- Save all the measurement results as vector graphic, bitmap or text file for subsequent import to other programs or in the data or text file for subsequent analysis.
- Print all the measurement results.
- Copy all the measurement results to the buffer.
- Set the events and sounds.
- Calculate the different digital filters and perform the analog filtering.
- Perform the oscilloscope timing chart smoothing.
- Display the statistics for all the channels of logical analyzer and generator.
- Upgrade the device firmware with USB bus that allows supplementing the device features with any functions to order

Technical characteristics for PoScope Basic2:
- number of channels:  2
- sample rate 100 Hz … 200 KHz
- buffer reading: 1126 sample/channel (1 channel), 563 sample/channel (2 channels)
- pipe reading: 64K sample/channel (1 or 2 channels)
- input voltage: -20 ... +20 V (hardware 2 sub-band)
- ADC capacity: 10 bits
- triggering: absolute (for rising/falling edge), differential (for difference between adjacent samples), external (for rising/falling edge of TTL levels) 
- window functions: Hamming, Hanning, Blackman, Blackman-Harris
- sample rate: 0.01 Hz … 200 KHz
- maximum record time: 24 hours at Fs < 100 Hz
- input voltage: -20 ... +20 V (hardware 2 sub-band)
- ADC capacity: 10 bit
Logic analyzer:
- number of channels: 16 (8 if logical generator is on)
- sample rate: 1 KHz … 8 MHz
- memory depth:
 buffer reading (Fs=4-8 mHz):  128 bit/channel
 buffer reading (Fs=2-2.66 mHz): 1160 bit/channel
 buffer reading (Fs<=1 mHz):  1544 bit/channel
 buffer reading in concatenation mode: 1 Mbit/channel
 pipe reading (Fs < 500KHz): 4К to 256M bit/channel
- input voltage: 0 ... +5 V (available surge voltage protection)
- triggering: for edges, mask, miss pulses, external clocking
- clocking: internal / external
Logical generator:
- number of channels: 8
- sample rate: 1 KHz … 1 MHz
- memory depth: 1544 bit/channel
- output voltage: "0" - 0 V, "1" - 3.3 V
- maximum input/output current: 10 mA

What is included in PoScope Mega1 Bundle:
- 2 PoProbe 60
- 1 PoProbe L2
- 1 USB cable
- 1 CD with software and manual

Using the Plug and Play USB technology, the PoScope mega 1 oscilloscope is easy to setup and use. The software is a fully featured oscilloscope, chart recorder, logic generator *, logic analyser *, and spectrum analyser with advanced trigering all in one easy to use package. Software in English, French *, German *, Italian * and Spanish * language.

PoScope Mega2 technical specifications:
Low current consumption: 60mA.
PoScope mega 1 modes:
2 +5 -channels oscilloscope
- Sample rate: up to 1MHz
- Input voltage: -20 - +20 V (0-3V on +5 inputs)
- ADC resolution: 12 bits
- Triggering: absolute, differential, external
- 2 +5 -channels spectrum analyzer
- Sample rate: up to 1MHz
- Input voltage: -20 - +20 V (0-3V on +5 inputs)
- ADC resolution: 12 bits
- Triggering: absolute, differential, external
- Window functions: Hamming, Hanning, Blackman, Blackman-Harris
- 2 +5 -channels recorder*
- Sample rate: up to 1MHz
- Input voltage: -20 - +20 V (0-3V on +5 inputs)
- ADC resolution: 12 bits
- Triggering: absolute, differential, external
- Marker measurements
- Option to add 99 markers with comments
- Maximum, minimum and average voltage measurement for each channel
- Waveform record limited by your PC capacity
- 16-channels logic analyzer*
- Sample rate: up to 10 MHz
- Input voltage: 0 - 5V
- Triggering: edge, level, mask
- Decoding*: UART, SPI, I2C and 1-Wire and others
- 8 channels square signal and PWM generator
- Frequency: TBD Mhz
- Duty cycle: 1- 99% f=7,8125 kHz
- 8-channels pattern generator*
- Sample rate: up to TBD MHz
- Memory depth: 4000 bit/channel
- Output voltage: logic 0 = 0V, logic 1 = 3.3 V
- Maximum input/output current: 10 mA
- +5 channells*
* 5 aditional analog inputs 0-3,3V on logic port

* will be avaiable as a free upgrade

Minimum computer requirements:
- Minimum resolution 1024x768@24bit
- RAM 512 MB
- Processor 1GHz
- Windows Xp, Vista, Windows 7, 32 and 64 bit
- free USB slot for each device

Dette produktet ble lagt til katalogen Monday 04 December, 2006.
 *Valg antall for varene du vil kjøpe og velg \Legg i handlekurv' knappen.
Viser 1 til 2 (av 2 produkter) Resultat sider:  1 
    Navn   Modell+   Velg   Pris 
PoScope Mega1  PoScope Mega1     76.00EUR  59.00EUR
PoScope Mega1 Bundle  PoScope Mega1 Bundle     130.00EUR  89.60EUR
Viser 1 til 2 (av 2 produkter) Resultat sider:  1 
0 varer

Bruk kodeord for produktet du ser etter.
Besøk vårt forum
Siste poster:

Besøk forumet
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce

Andre valuta

Kontakt oss | Om PCS Electronics | Support | FAQ | Hvordan starte guide | Forsendelse & Retur
Show prices In US$ | Show prices In EUR | Manualer, programvare og support

All tekst pa denne siden, produkt beskrivelser, guider og script
Kopirett © av PCS Elektronik d.o.o.
Laget av osCommerce