PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Slovensko    
  Na vrh » Katalog » FM oddajniki » FM oddajniki - kit kompleti » 15-25W @ 12V, Super Bass Moj račun  |  Vsebina vozička  |  Na blagajno   
Naši izdelki
FM oddajniki->
  FM oddajniki - kit kompleti
  Cyber Max FM+
  FM radio paketi
  Combo paketi
AM oddajniki
DAB+ digitalni radio->
Razprodaje
Material za oddajnike->
FM ojačevalniki->
FM radijske antene
TV oddajniki->
PC oddajniki
TV antene
TV ojačevalci->
Brezžične avdio/video povez
Koaksijalni kabel in konektorji
RDS koderji
Stereo koderji
Inštrumenti
Elektronske komponente
Programska oprema
Zanimivosti->
Sončni paneli
Oprema za studio->
DEVA Broadcast->
RF servis in razvoj
Kaj je novega?
1000W Planar FM pallet BLF188XR V2 PRO
1000W Planar FM pallet BLF188XR V2 PRO
399.99EUR
Naši radijski vodiči
Kako začeti
Pogosto zastavljena vprašanja
Kako narediti oddajnik
Koaksialni kabel
Avdio oprema
Sheme
Nove sheme
Čarovniki
Ojačevalci
Antena
Napajalnik
Priporočeno branje
Spajkanje
Pričevanja kupcev
Informacije
O podjetju PCS Elektronik d.o.o.
Pošiljanje in vračilo izdelkov
Naročanje
Podpora
Trenutne zaloge
Pogosto zastavljena vprašanja
Forum
Kontaktirajte nas
Distributerji
Izjava o varnosti in zasebnosti
Program oglaševalcev
Informacije o oglaševanju
FAQ programa oglaševalcev
Prijava oglaševalcev
Kuponi
FAQ za darilne kupone
Informacije o varnosti


PayPal and credit cards accepted!
MAXPRO8015/25+ 15W/25W SuperBass FM exciter
[15-25W @ 12V, Super Bass]
 


Qsonic PLL/VCO, excellent bass response, fast lock!

The new MAX PRO 8015+ FM exciters are fine-tuned, optimized and improved version of MAXPRO7015. They bring even better S/N ratio and MAXLINK II interface for easy no-soldering wiring to the new SE8000 DSP+ stereo encoder. They feature 15W of very clean power, QSonic VCO/PLL subsystem and everything else the previous 7015+ model had to offer.

Exciter carries a one year limited warranty on parts and labor against defects in materials and workmanship, except the RF final transistor.

You can find the manual for this (and other products) here.

How is MAXPRO8000 series better than MAXPRO7000 series?
- Supports previous MAXLINKI and new MAXLINK II for easy interfacing with the new SE8000 DSP+ without soldering
- MPX cable no longer needed for connection to new stereo encoders (Such as SE8000 DSP+).
- VU meter signals wired through MAXLINK II and LCD display flat cable which simplifies wiring considerably
- Further Improved S/N ratio across the band, designed for maximum spurious signal rejection (>80dBc). Some high-end customers appreciate this feature. Depending on operating frequency dBc can be >95dB down relative to the carrier.
- Self-resetting electronic PTC fuse (no more pesky fuse replacements).

What parameters can I change via remote control?
Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon! Feel free to ask for any features you may want.

PC control software

Can I upgrade my old CyberMaxFM+ 15W transmitter with new exciter?
Sure, just exchange the boards, take the 5000+ out and replace it with 8015.

Technical specifications:
- RF Output Power: 0 to 15 Watts, LCD power adjustment range can also be limited to 0-1W, 0-2W, 0-3W, 0-4W ... 0-15W, 0-full, this is done with a jumper (exact options vary depending on model).
- Output connector: 15 BNC
- Output Impedance: 50 Ohms
- Frequency range: 87.5-108MHz
- PLL Steps: 50KHz-500KHz, adjustable
- Frequency stability: +/- 20Hz
- Spurious/Harmonic rejection: Harmonics: >50dB, Spurious: (>80dB for MAXPRO7015)
- Power Supply 15W: 12-15V/3A or car battery
- Power connector: New design with plugin with 2 screw terminals or standard barrel type
- Quartz Locked PLL Frequency Control
- Ultra Stable, Ultra Clean Output
- No Expensive Test Equipment Required
- Audio performance: Less than 0.1% distortion, 20Hz-75KHz
- RF output ruggedness: SWR protection
- Polarity protection, temp protection
- Pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, unbalanced
- Audio Input Level: 0 dB
- S/N ratio: >90 dB
- PC Board Size 15W: 100x125mm
- Audio connectors: 2 pins and solder pads, MAXLINK II
- RF monitor: solder pads

What is the Predrilled LCD front panel?
- This is a rectangular piece of aluminum with predrilled holes for LCD display, button and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the transmitter into a nice looking case (eliminates the hard work with the LCD). This is of course an optional item.

What is MPX audio input board (RCA+XLR+ 192KHz USB) + 20cm flat cable?
- Rather than the BNC MPX input as before all MPX input models now have:
- RCA and balanced XLR inputs
- USB audio input supporting 192KHz sample rate!
- The usual BNC as before (signal is now passed through extra limiter low pass filter)
- Board can be configured to pass full MPX or limit at 15KHz (for mono operation) with a jumper.
- Extra limiter stage for MPX input
- Extra MPX low pass filter
- MPX level trimmer accesible through hole next to XLR connector (you can adjust MPX level/ deviation without opening up the transmitter
The result with this board is completely noise-free audio in any possible configuration. Important: This board is only recommended when you do not use SE8000 stereo encoder! When you have stereo encoder you do not need it!

What is that switch with LED diode?
MAXPRO8015+ is delivered without ON/OFF switch, there is a jumper that can be removed and connected to the switch. This is the switch we use in our 19" racks, it also has a built-in LED diode for better effect. Instructions on wiring this switch are shown on the main board. This is of course an optional item.

What is the RS232 IO board and why do I need it?
IO board is required, if you want to control MAXPRO8015+ remotely via RS232. It plugs into the LCD control module. RS232 cable is not included.

What is the IO board with 3x BNC connectors and why do I need it?
IO board is required, if you want to control MAXPRO8015+ remotely via USB, RS232 or GSM. The module plugs into the LCD control module. USB/RS232 cable is not included (standard cable is available everywhere). The three BNC cables can be used for MPX in, MPX out and 19KHz when used with stereo encoder. Optional item.

What is the Ethernet remote control module for?
This add-on card lets you connect this transmitter to the PC via Ethernet network. You can control and monitor the status of your transmitter over Ethernet or Internet. This is of course an optional item.

What is the GSM remote control module for?
This module plugs into IO board (RS232) and lets you control and monitor this transmitter via GSM phone with SMS messages or Android app. This is of course an optional item.

What is the Software+IOBOARD for changing logo?
This is a combination of special unlocked version of software and RS232 IO board, which is required to control MAXPRO8015+ remotely via PC/RS232. It plugs into the LCD control module. Software lets you change welcome text (logo); you can replace that text with your company name for example. Your customized text will be saved and used at every power-up. This is of course an optional item.

What else should I buy to construct a big 500W or 1000W or higher transmitter?
We really recommend these items to all users:
- Any of these pallets here, a power supply for these can be purchased here, don't forget a filter(LPFMAX series is ideal).
- Stereo encoder, any of these will do. SE8000 is ideal due to MAXLINK II.
- A rack enclosure from 1H to 3H, with fans, accessories and more...
- Use teflon RG142 50 ohm coax for internal connections inside your rack (teflon coax is easier to work with, it does not melt when hot). Make sure all coaxial cable leads are very short.

To look for a suitable antenna check: here.
To look for a suitable coaxial cable check: here.
To look for a suitable stereo encoder check: here.
To look for a suitable case check: here.


Ta izdelek smo dodali na spletno stran Ned 20 April, 2017.
 *Izberite količino za vsak izdelek, ki ga želite, in kliknite gumb 'Dodaj v voziček' spodaj.
Prikazujem 1 do 21 (od 21 izdelkov) Strani rezultatov:  1 
    Ime   Model   Izberi   Cena 
MAXPRO8015+ SB 15W with 2x16 LCD display with rotary button  MAXPRO8015+ SB 15W with 2x16 LCD display with rotary button   12V 15W, SE V3  169.99EUR
DDV se doda na koncu
MAXPRO8015+ SB 15W with 4x16 LCD display with rotary button  MAXPRO8015+ SB 15W with 4x16 LCD display with rotary button   12V 15W, SE V3  179.99EUR
DDV se doda na koncu
MAXPRO8025+ SB 25W with 4x16 LCD display with rotary button  MAXPRO8025+ SB 25W with 4x16 LCD display with rotary button   12V 25W, SE V3  189.99EUR
DDV se doda na koncu
MAXPRO8025+ SB 25W with 2x16 LCD display with rotary button  MAXPRO8025+ SB 25W with 2x16 LCD display with rotary button   12V 25W, SE V2  149.99EUR
DDV se doda na koncu
SE8000 DSP+ stereo encoder + MAXLINK II cable  SE8000 DSP+ stereo encoder + MAXLINK II cable     134.99EUR
DDV se doda na koncu
RDSMAX8000 micro RDS encoder with 20cm 6-pin flat cable  RDSMAX8000 micro RDS encoder with 20cm 6-pin flat cable     69.99EUR
DDV se doda na koncu
MPX audio input board (RCA+XLR+ 192KHz USB) + 20cm flat cable  MPX audio input board (RCA+XLR+ 192KHz USB) + 20cm flat cable   MPX (BNC/XLR/RCA + 192KHz USB)  59.99EUR
DDV se doda na koncu
Replacement LDMOS for MP8015+  Replacement LDMOS for MP8015+     19.99EUR
DDV se doda na koncu
Ethernet remote control + cable (needs IO board w BNC)  Ethernet remote control + cable (needs IO board w BNC)     49.99EUR
DDV se doda na koncu
14-pin DIGIAMP flat cable (30cm, 2 connectors)  14-pin DIGIAMP flat cable (30cm, 2 connectors)     3.99EUR
DDV se doda na koncu
14-pin LCD display flat cable (40cm, 2 connectors)  14-pin LCD display flat cable (40cm, 2 connectors)   LCD cable, 3x longer  6.49EUR
DDV se doda na koncu
14-pin DIGIAMP flat cable (90cm, 2 connectors)  14-pin DIGIAMP flat cable (90cm, 2 connectors)     7.99EUR
DDV se doda na koncu
14-pin DIGIAMP flat cable (60cm, 2 connectors)  14-pin DIGIAMP flat cable (60cm, 2 connectors)     4.99EUR
DDV se doda na koncu
Switch with LED diode for rack  Switch with LED diode for rack     3.19EUR
DDV se doda na koncu
Software+IOBOARD for changing logo  Software+IOBOARD for changing logo     59.99EUR
DDV se doda na koncu
Ethernet control with Barix IP audio upgrade  Ethernet control with Barix IP audio upgrade     199.99EUR
DDV se doda na koncu
IO board (USB+RS232+3xBNC) with 2x20cm 6-pin flat cable  IO board (USB+RS232+3xBNC) with 2x20cm 6-pin flat cable   2x flat cable  44.99EUR
DDV se doda na koncu
Pre-drilled LCD panel (rotary button 4x16)  Pre-drilled LCD panel (rotary button 4x16)     5.99EUR
DDV se doda na koncu
Pre-drilled panel for SE8000  Pre-drilled panel for SE8000     4.99EUR
DDV se doda na koncu
Pre-drilled panel for IO board  Pre-drilled panel for IO board     4.99EUR
DDV se doda na koncu
DCMAX-1K SWR/power sensor with Digiamp  DCMAX-1K SWR/power sensor with Digiamp     34.99EUR
DDV se doda na koncu
Prikazujem 1 do 21 (od 21 izdelkov) Strani rezultatov:  1 
Nakupovalni voziček
0 izdelkov
Hitro iskanje
 

Za iskanje uporabite ključne besede.
Obvestila
Obiščite naš forum
Zadnje objave:

Kliknite za prikaz foruma
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce Slovensko
Valute
   

Druge valute

Kontaktirajte nas | O podjetju PCS Elektronik d.o.o. | Podpora | Pogosto zastavljena vprašanja | Kako začeti | Pošiljanje in vračilo izdelkov
Prikaži cene v US$ | Prikaži cene v EUR | Priročniki, programska oprema in podpora

Vse besedilo na tej spletni strani, opisi izdelkov, vodiči in skripte so
last podjetja PCS Elektronik d.o.o.
osCommerce