PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Topp » Katalog » FM transmitters » FM transmitter kits » 15W @ 12V, stereo rds, SB Min konto  |  Handlekurv  |  Sjekk ut   
Våre produkter
FM transmitters->
  FM transmitter kits
  Cyber Max FM+ series
  FM radio packages
  Combo packages
AM transmitters
DAB+ digital radio transmitters->
Special sale items
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
PC Transmitters
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components
Software
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcast->
RF service and design
Hva er nytt?
MRF1K80 1500W FM Pallet amplifier
MRF1K80 1500W FM Pallet amplifier
609.99EUR
Våre radioguider
Hvordan starte guide
FAQ
Making Your Own Transmitter
Koaksialkabel
Lydutstyr
Skjema
Nye skjema
Vegviser
Forsterkere
Antenner
Strømforsyning
Anbefalt lesning
Lodding
Testimonials
Informasjon
Om PCS Electronics
Forsendelse & Retur
Handle
Support
Tilgjengelig på lager
FAQ
Forum
Kontakt oss
Distributører
Personopplsyninger
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Kort
Gavekort FAQ
Sikkerhetsinformasjon


PayPal and credit cards accepted!
MAXPRO8015+ STR 15W SuperBass FM stereo exciter
[15W @ 12V, stereo rds, SB]
 


Full pro stereo solution with optional RDS, Qsonic PLL/VCO, excellent bass response, fast lock!

The new MAXPRO8015+ STR FM exciters are fine-tuned, optimized and improved version of MAXPRO8015 with added SE8000DSP+ stereo encoder all on the same board. They bring even better performance and great convenience with easy no-soldering wiring. They feature 15W of very clean power, QSonic VCO/PLL subsystem and everything else the previous 8015+ model had to offer.

Exciter carries a one year limited warranty on parts and labor against defects in materials and workmanship, except the RF final transistor.

You can find the manual for this (and other products) here.

How is MAXPRO8000+ STR series better than MAXPRO8015?
- Everything, stereo encoder and FM transmitter, are on one single board, less interconnecting cables.
- Smaller than MAXPRO8015+ and SE8000DSP+
- Firmware improvements
- 100 power adjustment steps
- Improved power adjustment for external amplifiers
- New LCD display brings VU meter cabling to the LCD further simplifying wiring inside enclosure
- Improved S/N ratio, designed for maximum spurious signal rejection (>80dBc).

What parameters can I change via remote control?
Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon! Feel free to ask for any features you may want.

PC control software

Technical specifications:
- RF Output Power: 0 to 15 Watts, LCD power adjustment range can also be limited to 0-0.5W, 0-1W, 0-1.5W... 0-15W, this is done with a jumper
- Output connector: MCX, pigtails with panel-mount N female
- Output Impedance: 50 Ohms
- Frequency range: 87.5-108MHz
- PLL Steps: 50KHz-500KHz, adjustable
- Frequency stability: +/- 20Hz
- Spurious/Harmonic rejection: Harmonics: >50dB, Spurious: (>85dB)
- Power Supply 15W: 12-15V/3A or car battery
- Power connector: standard barrel type
- Quartz Locked PLL Frequency Control
- Ultra Stable, Ultra Clean Output
- No Expensive Test Equipment Required
- Audio performance: Less than 0.1% distortion, 20Hz-75KHz
- RF output ruggedness: SWR protection
- Polarity protection, temp protection
- Pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, unbalanced
- Audio Input Level: 0 dB
- S/N ratio: >90 dB
- PC Board Size 15W: 100x220x40mm (WxLxH)
- RF monitor: solder pads

Integrated on-board stereo encoder:
- Excellent stereo separation due to 114x oversampling
- On-board XLR connectors and RCA connectors
- On-board USB audio interface
- Edge-mounted on-board MPX level trimmer, accesible from the outside
- Additional low pass filters and limiters
- On-board RF/LC filter and ESD protection
- Easy interfacing with new IO board and RDS (via flat cable)
- Integrated IO board also supports Ethernet now (requires Ethernet module)

Technical specifications:
- Audio Response: 10Hz-15KHz, DSP or LC filtered (as per CCIR standards)
- DSP: 24-bit Digital Signal Processor, Analog: LC filters
- 19KHz notch filter, >-60 dB typ
- Precise pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, balanced or unbalanced
- Audio Input Level: 0 dB
- Distortion: <0.1%
- S/N ratio: >90 dB
- Separation: >60 dB typ. (much more than typical radio receivers can resolve)
- Pilot Frequency: 19 KHz, 114x oversampled MPX
- Output Impedance: 75 Ohms
- Audio connectors: RCA jacks, XLR balanced inputs

What is included as standard with every MAXPRO8015+ STR exciter board?
- 1x MAXPRO8015+ STR board
- 1x 4x16 LCD display with flat cable
- 1x IO board with USB display, 3 BNC connectors and 25cm flat cable (for remote control)
- ON/OFF switch with LED diode
- Pigtail cable MCX to N female (panel mount)

What is the RDSMAX8000+ micro board?
This is a plug-in upgrade board for SE8000. It is simply plugged into it. Once connected the SE8000+ supports RDS (Radio Data System) functionality. This board also require IO board which makes it possible to program RDS with a computer via USB or RS232. Same IO board connects both to LCD and to RDS board.

What is the "Predrilled MAXPRO8015STR+ enclosure without cover"?
- This is a U-shaped piece of aluminum that perfectly fits your MAXPRO8015STR+ along with front and back panels, both with predrilled holes for LCD display, button, audio connectors and IO board. Makes it much easier to mount the exciter into a nice looking case (eliminates the hard work with the LCD and back panel). You can cut away the front and back panels and use them in your own box. Or you can make a new cover and use this as a stand-alone transmitter. This is of course an optional item, but it is highly recommended.


What is the Ethernet remote control module for?

This add-on card lets you connect this transmitter to the PC via Ethernet network. You can control and monitor the status of your transmitter over Ethernet or Internet. Plugs into IO board so IO board is a must to use it. This is an optional item.

What is DC-1 directional coupler board?
- This add-on card connects between any optional pallet amplifier and antenna and lets MAXPRO8015 display power and reflected power. Ships with DIGIAMP flat cable.

What else should I buy to construct a big 500W or 1000W or higher transmitter?
We really recommend these items to all users:
- Any of these pallets here, a power supply for these can be purchased here, don't forget a filter(LPFMAX series is ideal).
- A rack enclosure from 1H to 3H, with fans, accessories and more...
- Use teflon RG142 50 ohm coax for internal connections inside your rack (teflon coax is easier to work with, it does not melt when hot). Make sure all coaxial cable leads are very short.

Note: This is a new product and there is some lead time
Won't start shipping until end of May, we are still ironing out software/firmware.

To look for a suitable antenna check: here.
To look for a suitable coaxial cable check: here.
To look for a suitable case check: here.


Dette produktet ble lagt til katalogen Monday 06 May, 2019.
 *Valg antall for varene du vil kjøpe og velg \Legg i handlekurv' knappen.
Viser 1 til 5 (av 5 produkter) Resultat sider:  1 
    Navn   Modell   Velg   Pris 
MAXPRO8015+ STR 15W Stereo FM package  MAXPRO8015+ STR 15W Stereo FM package     399.99EUR
DCMAX-1K SWR/power sensor with Digiamp  DCMAX-1K SWR/power sensor with Digiamp     34.99EUR
Ethernet remote control + cable  Ethernet remote control + cable     49.99EUR
RDSMAX8000 micro RDS encoder with 20cm 6-pin flat cable  RDSMAX8000 micro RDS encoder with 20cm 6-pin flat cable     69.99EUR
Predrilled MAXPRO8015STR+ enclosure without cover  Predrilled MAXPRO8015STR+ enclosure without cover     24.99EUR
Viser 1 til 5 (av 5 produkter) Resultat sider:  1 
Handlekurv
0 varer
Søk
 

Bruk kodeord for produktet du ser etter.
Meddelse
Besøk vårt forum
Siste poster:

Besøk forumet
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Valuta
   

Andre valuta

Kontakt oss | Om PCS Electronics | Support | FAQ | Hvordan starte guide | Forsendelse & Retur
Show prices In US$ | Show prices In EUR | Manualer, programvare og support

All tekst pa denne siden, produkt beskrivelser, guider og script
Kopirett © av PCS Elektronik d.o.o.
Laget av osCommerce