세일!

Semirigid, 25-ohm 및 기타 특수 동축 케이블

 2,49~ 20,99

In Stock
 7,49

재고 있음

 3,99

재고 있음

 3,99

재고 있음

 8,19

재고 있음

 8,19

재고 있음

 7,29

재고 있음

 8,99

재고 있음

 4,99

재고 있음

 3,99

재고 있음

 4,99

재고 있음

 7,09

재고 있음

 7,84

재고 있음

 8,59

재고 있음

 20,99

재고 있음

 11,49

재고 있음

 11,99

재고 있음

 4,09

재고 있음

 7,84

재고 있음

 7,84

재고 있음

 8,20

재고 있음

 4,90

재고 있음

 3,59

재고 있음

 3,62

재고 있음

 3,69

재고 있음

 2,99

재고 있음

 2,49

재고 있음

 3,29

재고 있음

원래 가격: € 9,49.현재 가격: € 8,59.

재고 있음

 6,99

재고 있음

 6,99

재고 있음

 6,99

재고 있음

 6,29

재고 있음

 5,39

재고 있음

표시된 가격은 VAT가 없는 가격입니다(EU에서만 지불).

설명

Special coaxial cables – now with “cut to size” service (scroll down)

Advanced users often need non-standard coaxial cable types. Typical field of use for these coaxial cables is in various  impedance transformers, internal wiring, combiners, couplers, splitters etc. They are typically hard to find since vendors often do not stock them. We are here offering you a few of these special coaxial cable types. Please search below to find the cable you need. If you don’t see the cable you need e-mail and we will try to find it for you.

Specifications for TC-12 coaxial cable
– Outer mantle diameter: 4.17mm
– Outer conductor diameter: 3.38mm
– Inner conductor diameter: 2.13mm
– Impedance: 10.77 ohms
– Each conductor is made of stranded silver-plated copper
– Type Extruded PTFE insulation
– Sintered wrapped white PTFE tape
– Temperature rating: -65 C to +200 C
– Voltage rating: 600 volts

Specifications for TC-16 coaxial cable
– Type: Perfect for RF pallets (BLF184, ART700, MRF300, etc)
– Outer mantle diameter: 2.85mm
– Impedance: 16,1 ohms
– Each conductor is made of stranded silver-plated copper
– Type Extruded PTFE insulation
– Sintered wrapped white PTFE tape
– Temperature rating: -65 C to +200 C
– Voltage rating: 600 volts
– Min inside bend radius: 24mm
– Max power handling:  750W @100MHz

Specifications for TC-18 coaxial cable
– Outer mantle diameter: 3.05mm
– Outer conductor diameter: 2.24mm
– Inner conductor diameter: 1.19mm
– Impedance: 17,06 ohms
– Each conductor is made of stranded silver-plated copper
– Type Extruded PTFE insulation
– Sintered wrapped white PTFE tape
– Temperature rating: -65 C to +200 C
– Voltage rating: 600 volts

Specifications for TC-20 coaxial cable
– Outer mantle diameter: 2.79mm
– Outer conductor diameter: 2.01mm
– Inner conductor diameter: 0.94mm
– Impedance: 18.59 ohms
– Each conductor is made of stranded silver-plated copper
– Type Eextruded PTFE insulation
– Sintered wrapped white PTFE tape
– Temperature rating: -65 C to +200 C
– Voltage rating: 600 volts

Specifications for TC-22 coaxial cable
– Outer mantle diameter: 2.59mm
– Outer conductor diameter: 1.8mm
– Inner conductor diameter: 0.74mm
– Impedance: 21.69 ohms
– Each conductor is made of stranded silver-plated copper
– Type Extruded PTFE insulation
– Sintered wrapped white PTFE tape
– Temperature rating: -65 C to +200 C
– Voltage rating: 600 volts

Specifications for TC-24 coaxial cable
– Outer mantle diameter: 2.41mm
– Outer conductor diameter: 1.68mm
– Inner conductor diameter: 0.53mm
– Impedance: 26.8 ohms
– Each conductor is made of stranded silver-plated copper
– Type Eextruded PTFE insulation
– Sintered wrapped white tape
– Temperature rating: -65 C to +200 C
– Voltage rating: 600 volts

Technical specifications for RG142/U high temperature PTFE:
Dual silver shields. Brown tinted FEP jacked
– Diameter 4.9 mm
– Insulation: PTFE
– Capacitance: 29pF/ft
– Velocity factor 70.9%
– dB loss/100m @ 100MHz 5.5dB
– Suitable for longer cable runs, up to ~10m
– Maximum recommended power handling 1300W
This is the best cable for Wilkinson combiners, internal wiring and all applications which require direct soldering, good power handling and high temperature resistance. This is the cable to use for internal wiring in high power amplifiers (more than 300W).

Technical specifications for RG178/U PTFE brown:
– Diameter 2 mm, our tiniest cable
– dB loss/100m @ 100MHz ~25dB
– Insulation: PTFE
– Capacitance: 29pF/ft
– Suitable for very short runs (1m-2m) and not more than 100W power
– Very suitable for internal interconnection due to heat resistance, virtually impossible to burn isolation while soldering, also suitable for Wilkinson combiners and wideband transformers.

Specifications for RG179 PTFE brown:
– Impedance: 75 +/- 1.5
– Coaxial Type: RG/U 179
– Diameter: 2.8 mm
– Center conductor: 7×38, silver plated
– Insulation: PTFE
– Capacitance: 19.5pF/ft
– Min. bend radius: 25mm
– Power handling: 865W(100MHz)
– dB loss/100 feet @ 100MHz ~10dB
– dB loss/100 feet @ 400MHz ~16dB
– Jacket Color: Brown
– Jacket Material: FEP
– Very suitable for pallets and combiners, virtually impossible to burn isolation while soldering.

Specifications for RG188A PTFE white:
– 임피던스: 50옴
– Coaxial Type: RG/U188A
– Velocity Factor: 69.5%
– Diameter: 2.5 mm
– Center conductor: 7×34, silver plated copper covered steel
– Insulation: PTFE
– Capacitance: 29pF/ft
– Min. bend radius: 36mm
– dB loss/100 feet @ 100MHz ~8.3dB
– dB loss/100 feet @ 400MHz ~17.5dB
– Jacket Color: White
– Jacket Material: FEP
– Very suitable for pallets and combiners, virtually impossible to burn isolation while soldering.

Specifications for RG303 PTFE brown:
– 임피던스: 50옴
– Diameter 4 mm
– Capacitance: 32pF/ft
– Min. bend radius: 23mm
– Power handling: 2.4KW(100MHz)
– dB loss/100 feet @ 100MHz ~3.9dB
– Very suitable for internal interconnection due to heat resistance, virtually impossible to burn isolation while soldering, also suitable for wilkinson combiners and wideband transformers.

Specifications for RG316 PTFE white:
– 임피던스: 50옴
– Coaxial Type: RG/U 316
– Velocity Factor: 69.5%
– Diameter: 2.5 mm
– Center conductor: 7×34, silver plated copper covered steel
– Insulation: PTFE
– Capacitance: 29pF/ft
– Min. bend radius: 25mm
– dB loss/100 feet @ 100MHz ~8.3dB
– dB loss/100 feet @ 400MHz ~17.5dB
– Jacket Color: white
– Jacket Material: FEP
– Very suitable for pallets and combiners, virtually impossible to burn isolation while soldering.

Specifications for RG393 PTFE white:
– 임피던스: 50옴
– Coaxial Type: RG/U 393
– Velocity Factor: 69.5%
– Diameter: 9,91 mm
– Center conductor: 2,39 mm silver plated copper, 7 strands
– Insulation: PTFE
– Capacitance: 29pF/ft
– Min. bend radius: 99mm
– dB loss/100 feet @ 100MHz ~2.1dB
– dB loss/100 feet @ 1000MHz ~7.5dB
– Power handling @ 100MHz ~6300W
– Power handling @ 1000MHz ~1700W
– Jacket Color: Brown
– Jacket Material: FEP
– Very suitable for pallets and combiners, virtually impossible to burn isolation while soldering.


Specifications for 0.07 inch semi-rigid 10 ohm cable:
– Impedance: 10 +/-2 ohms
– Diameter: 1.8mm
– Outer plating: Silver-Ag
– Dielectric: FEP
– Center conductor material: SPC
– Center conductor diameter: 1.08mm
– Capacitance: 144pF/ft
– Min inside bend radius: 3.18mm
– Weight: 19g/meter
– Max voltage(60Hz rms): 1000V
– Cut off frequency: 58GHz
– Attenuation 0.5GHz: 56dB/100 feet
– Attenuation 1GHz: 79dB/100 feet
– Attenuation 5GHz: 178dB/100 feet
– Attenuation 20GHz: 360dB/100 feet

Specifications for 0.034 inch semi-rigid 17 ohm cable:
– Impedance: 17 ohms +/- 1ohm
– Diameter: 0.86mm
– Center conductor diameter: 0.4mm
– Outer plating: Copper
– Dielectric: PTFE
– Center conductor material: SPC
– Capacitance: 280pF/m
– Min inside bend radius: 3.18mm
– Weight: 19g/meter
– Max voltage(60Hz rms): 500V
– Cut off frequency: 128GHz
– Attenuation 0.5GHz: 62dB/100 feet
– Attenuation 1GHz: 88dB/100 feet
– Attenuation 5GHz: 198dB/100 feet
– Attenuation 20GHz: 406dB/100 feet
– Maximum power 0.5GHz: 27W
– Maximum power 1GHz: 19W
– Maximum power 5GHz: 8.4W
– Maximum power 20GHz: 4.1W

Specifications for 0.07inch semi-rigid 25 ohm cable:
– Impedance: 25 ohms
– Diameter: 1.8mm
– Center conductor diameter: 0.81mm
– Outer plating: Silver plated copper
– Dielectric: FEP
– Center conductor material: SPC
– Capacitance: 190pF/m
– Max voltage(60Hz rms): 2500V
– Min inside bend radius: 3.18mm
– Weight: 15g/meter
– Cut off frequency: 58GHz
– Attenuation 0.5GHz: 21.7dB/100 feet
– Attenuation 1GHz: 30.9dB/100 feet
– Attenuation 5GHz: 71.4dB/100 feet
– Attenuation 20GHz: 151.1dB/100 feet
– Maximum power 0.5GHz: 78.1W
– Maximum power 1GHz: 55W
– Maximum power 5GHz: 24W
– Maximum power 20GHz: 12W
– Max power handling @100MHZ: ~150W

Specifications for 0.09inch semi-rigid 25 ohm cable:
– Impedance: 25 ohms
– Diameter: 2.3mm
– Center conductor diameter: 1.02mm
– Outer plating: Bare copper, CU
– Dielectric: PTFE
– Center conductor material: SPC
– Capacitance: 190pF/m
– Corona extinction voltage: 750V
– Max voltage(60Hz rms): 1000V
– Min inside bend radius: 3.18mm
– Weight: 24g/meter
– Cut off frequency: 46GHz
– Attenuation 0.5GHz: 16.1dB/100 feet
– Attenuation 1GHz: 23.0dB/100 feet
– Attenuation 5GHz: 53.8dB/100 feet
– Attenuation 20GHz: 116.0dB/100 feet
– Maximum power 0.5GHz: 205.0W
– Maximum power 1GHz: 143.8W
– Maximum power 5GHz: 62.1W
– Maximum power 20GHz: 29.3W
– Max power handling @100MHZ: ~430W

Specifications for 0.125inch semi-rigid 25 ohm cable:
– Impedance: 25 ohms
– Diameter: 3.18mm
– Center conductor diameter: 1.42mm
– Outer plating: Bare copper, CU
– Dielectric: PTFE
– Center conductor material: SPC
– Capacitance: 200pF/m
– Corona extinction voltage: 1500V
– Max voltage(60Hz rms): 2500V
– Min inside bend radius: 4.78mm
– Weight: 48,9g/meter
– Cut off frequency: 34GHz
– Attenuation 0.5GHz: 12.7dB/100 feet
– Attenuation 1GHz: 18.2dB/100 feet
– Attenuation 5GHz: 43dB/100 feet
– Attenuation 20GHz: 63dB/100 feet
– Maximum power 0.5GHz: 500.0W
– Maximum power 1GHz: 350W
– Maximum power 5GHz: 150W
– Maximum power 20GHz: 100W
– Max power handling @100MHZ: ~1200W

Specifications for 0.09 inch semi-rigid 75 ohm cable:
– Impedance: 75 ohms (+-2)
– Outer diameter: 2.3mm
– Center conductor diameter: 0.0325mm
– Outer plating: Bare copper, CU
– Dielectric: FEP (PTFE)
– Center conductor material: SPC (Silver Plated Copper)
– Capacitance: 63,5pF/m
– Corona extinction voltage: 1500V
– Max voltage(60Hz rms): 2500V
– Min inside bend radius: 3.18mm
– Weight: 24g/meter
– Cut off frequency: 60GHz
– Attenuation 0.5GHz: 13.3dB/100 feet
– Attenuation 1GHz: 19.1dB/100 feet
– Attenuation 5GHz: 45dB/100 feet
– Attenuation 20GHz: 98dB/100 feet
– Maximum power 0.5GHz: 199.2W
– Maximum power 1GHz: 139.4W
– Maximum power 5GHz: 59.7W
– Maximum power 20GHz: 27.8W
– Max power handling @100MHZ: ~390W

Specifications for 0.141 inch semi-flexible hand-bendable 50 ohm cable:
– Impedance: 50 +/-2 ohms
– Jacket outside diameter: 4.27mm
– Outer conductor: Cu/Sn braided
– Outer conductor diameter: 3.58mm
– Center conductor diameter: 0.91mm
– Jacket material: FEP
– Dielectric: PTFE
– Center conductor material: SPCW
– Capacitance: 95.1pF/m
– Corona extinction voltage: 1900V
– Max voltage(60Hz rms): 5000V
– Min inside bend radius: 9.53mm
– Weight: 50.5g/meter
– Cut off frequency: 34GHz
– Attenuation 0.5GHz: 8dB/100 feet
– Attenuation 1GHz: 12dB/100 feet
– Attenuation 5GHz: 30.4dB/100 feet
– Attenuation 20GHz: 65dB/100 feet
– Maximum power 0.5GHz: 495.0W
– Maximum power 1GHz: 345W
– Maximum power 5GHz: 136W
– Maximum power 20GHz: 64W
– Max power handling @100MHZ: ~800W

Specifications for 0.250 inch semi-flexible hand-bendable 50 ohm cable:
– Impedance: 50 +/-2 ohms
– Jacket outside diameter: 6.8mm
– Outer conductor: Cu/Sn braided
– Outer conductor diameter: 6.35mm
– Center conductor diameter: 1.63mm
– Jacket material: FEP
– Dielectric: PTFE
– Center conductor material: SPC
– Capacitance: 95.1pF/m
– Corona extinction voltage: 3000V
– Max voltage(60Hz rms): 7500V
– Min inside bend radius: 30mm
– Weight: 168g/meter
– Cut off frequency: 19GHz
– Attenuation 0.5GHz: 4.4dB/100 feet
– Attenuation 1GHz: 6.7dB/100 feet
– Attenuation 5GHz: 18dB/100 feet
– Attenuation 18GHz: 43dB/100 feet
– Maximum power 0.5GHz: 1650W
– Maximum power 1GHz: 1040W
– Maximum power 5GHz: 450W
– Maximum power 18GHz: 236W
– Max power handling @100MHZ: ~2500W

Specifications for 0.141 inch semi-rigid 75 ohm cable:
– Impedance: 75 +/-1 ohms
– Diameter: 3.58mm
– Outer plating: Copper/Cu
– Dielectric: PTFE
– Center conductor material: SPCW
– Center conductor diameter: 0.51mm
– Capacitance: 63.5pF/m
– Min inside bend radius: 1.91mm
– Weight: 45g/meter
– Max voltage(60Hz rms): 5000V
– Cut off frequency: 38GHz
– Attenuation 0.5GHz: 8.4dB/100 feet
– Attenuation 1GHz: 12.1dB/100 feet
– Attenuation 5GHz: 29.4dB/100 feet
– Attenuation 20GHz: 67.2.dB/100 feet
– Maximum power 0.5GHz: 549
– Maximum power 1GHz: 382W
– Maximum power 5GHz: 160.6W
– Maximum power 20GHz: 72.4W

Specifications for 0.130 inch semi-rigid 93 ohm cable:
– Impedance: 93 +/-1.5 ohms
– Diameter: 3.3mm
– Outer plating: Copper/Cu
– Dielectric: PTFE
– Center conductor material: SPCW
– Center conductor diameter: 0.29mm
– Capacitance: 51.2pF/m
– Min inside bend radius: 4.78mm
– Weight: 42g/meter
– Max voltage(60Hz rms): 3000V
– Cut off frequency: 46GHz
– Attenuation 0.5GHz: 11.2dB/100 feet
– Attenuation 1GHz: 16.1dB/100 feet
– Attenuation 5GHz: 38.2dB/100 feet
– Attenuation 20GHz: 84.7.dB/100 feet
– Maximum power 0.5GHz: 380
– Maximum power 1GHz: 226W
– Maximum power 5GHz: 113.5W
– Maximum power 20GHz: 52.4W

Specifications for TF-25 25-ohm flexible coaxial cable
– Impedance: 25+-2 ohms
– Velocity factor: 0.71 (unverified)
– Diameter conductor: 0.96mm (19 strands 0.25mm each) silver plated copper CuAg
– Diameter dielectric: 2.0mm
– Outer plating: 2.5mm silver plated copper braid CuAg, 85% coverage
– Diameter outside: 3.0mm FEP white
– Temperature range: -100C/+200C
– Dielectric: PTFE
– Capacitance: 198pF/m
– Test voltage: 5KV DC
– ROHS compliant: Yes
– Min inside bend radius: 30mm
– Attenuation db/100m: 11.1dB@10MHz, 71.3dB@400MHz, 114dB@1000MHz

25-ohm flexible coaxial cable (2.45mm dia white):
– Impedance: 25 ohms (actual measurements show 21-22)
– Type: Perfect for broadcasting type RF pallets (SD2942, BLF574 etc)
– Diameter: 2.45mm
– Outer plating: Silver Plated Copper
– Temperature range: -65C/+200C
– Dielectric: PTFE
– Capacitance: 69pF/foot
– Max voltage: 600Vrms
– ROHS compliant: Yes
– Min inside bend radius: 20mm
– Max power handling: 600W @ 100MHz

 25-ohm flexible coaxial cable (2.87mm dia white):
– Actual measured impedance: 16,5 ohms
– Type: Perfect for RF pallets (BLF184, ART700, MRF300, etc)
– Diameter: 2.87mm
– Capacitance: 92pF/foot
– Outer plating: Silver Plated Copper stranded wire
– Temperature range: -55C/+200C
– Dielectric: PTFE
– ROHS compliant: Yes
– Min inside bend radius: 25mm
– Max power handling: 600-800W @100MHz

Specifications for 25-ohm flexible coaxial cable (blue):
– Impedance: 25 ohms
– Type: Perfect for RF pallets
– Diameter: 4.10mm
– Outer plating: Silver Plated Copper stranded wire
– Temperature range: -55C/+200C
– Dielectric: PTFE
– ROHS compliant: Yes
– Min inside bend radius: 35mm
– Max power handling: 1000W @ 100MHz

Specifications for 35-ohm flexible coaxial cable (4,1mm red):
– Impedance: 35 ohms
– Capacitance 134pF/m
– Velocity: 70%
– Power handling: 1200W @ 100MHz, 600W @ 1GHz, 180W @ 5GHz
– Attenuation: 0.3dB/m @500MHz
– Type: Perfect for RF pallets
– Diameter: 4.10mm
– Outer plating: 3.58mm tin plated copper braid
– Temperature range: -55C/+165C
– Dielectric: PTFE, 2.97mm
– Center: Solid CuAg 1.3mm
– ROHS compliant: Yes
– Min inside bend radius: 10mm single, 40mm repeated
– Delay 4.7nS/,
– Max power handling: 1000W @ 100MHz

Specifications for Semi-flexible 50 ohm coaxial cable:
– Impedance: 50ohms
– Type: Perfect for RF pallet (BLF578 800W)
– Diameter: 3.51mm
– Velocity: 69.5%
– Capacitance: 96.8pF/m
– Outer plating: Bare, unjacketed, copper-tin composite 100% coverage
– Temperature range: -55C/+105C
– Dielectric: PTFE
– Inner conductor: Silver coated copper covered steel, ~1mm
– Attenuation: 26dB/100m at 500MHz
– ROHS compliant: Yes
– Min inside bend radius: 2.8mm
– Max power handling: >1000W(100MHz)

Specifications for RG11 75 ohm coaxial cable for combiners:
– Impedance: 75ohms
– Type: Perfect for antenna combiners, good quality solid dielectric (easy to work with)
– Jacket diameter: 10.4mm
– Velocity: 66%
– Capacitance: 22pF/feet
– Outer plating: Black PVC
– Shielding: 95% copper braid
– Dielectric: Solid Polyethylene neutral color
– Inner conductor: AWG18 stranded
– Attenuation: 5.2dB/100feet at 400MHz
– Attenuation: 9.4dB/100feet at 1000MHz
– ROHS compliant: Yes
– Max power handling: ~ 800W(100MHz)

 

Specifications for 141-100 coaxial cable
– Dielectric: PTFE
– Outer mantle diameter: 3.52mm
– Outer conductor diameter: 3.00mm
– Inner conductor diameter: 0.28mm, Silver plated Copper Clad Steel
– Impedance: 100 ohms
– Capacitance: 47,6 pF/m
– Velocity of propagation: 70%
– Cutoff frequency: 36GHz

– Time delay: 4.7ns/m
– Shielding effectiveness up to 18GHz: 100dB
– Temperature rating: -55 C to +200 C
– Voltage rating: 600 volts
– Minimal bending radius static: 8mm
– Minimal bending radius repeated: 40mm
– Attenuation 500MHz: 0,35dB/m
– Maximum power 500MHz: 245,5W (CW)
– Attenuation 1GHz: 0,5dB/m
– Maximum power 1GHz: 172,2W (CW)
– Attenuation 5GHz: 1,16dB/m
– Maximum power 5GHz: 74,5W (CW)
– Attenuation 10GHz: 1,69dB/m
– Maximum power 5GHz: 51,5W (CW)

중요한: Semirigid/hardline cable comes in lengths of 3 feet max! Since this cable is relatively hard it is best to avoid bending it. Hence the limit of 3 feet (shipping limitation).

CUT TO SIZE service:
PTFE coaxial cables are not easy to cut. Luckily for you we now offer CUT TO SIZE service, we can cut the coax for you. All we need is exact dimensions. Cutting is done with professional equipment and the cable will look really well afterwards. There is no way to cut it so nicely without the special tool. See the video below. To order this service 문의하기 for a quote or place order and specify measurements under details and we’ll get back to you with a quote. It is not expensive so it is very much worth the cost..

This is how this is done:


 

추가 정보

상품평

아직 상품평이 없습니다.

상품을 구매한 로그인 고객만 상품평을 남길 수 있습니다.