ART1K6FH 1400W FM 팔레트 증폭기(50-55V)

설명

The new Ampleon ART1K6FH makes it possible to create highly rugged 1200-1400W (1600W pulsed) pallets for high VSWR industrial and broadcast (analog and digital) applications.

Device: Ampleon ART1K6FH
Approx 82% efficiency @ 88-108Mhz CW @ 52V
Pmax(P1dB) = 1400W @ 108MHz/52V
Up to 1600W at 55V pulsed
Recommended voltage supply: 50V DC
Supply current: >33A
Operating Temperature range: 0 to +70 °C ( at Device Flange )
Storage Temperature range: -30 to +90 °C
Load Mismatch: 65:1 (all phase angle)
Ensure sufficient strong airflow across the top of the pallet, the PCB can get very hot at max power

Amplifier technical details:
Frequency Range: 87.5 to 108 Mhz
Power Gain: 26dB typ. ±1dB
Power Output: 1200W (P1dB) typ. @ 48V (more at 52V or 55V but with reduced life and SWR sensitivity)
Power Input: 3W typ.
Efficiency: 81-84% typ. @ 108Mhz FM CW
Supply Voltage: 30-55V typ, 55V max
Size (LxWxH): 130x62x30mm
F2 Second Harmonic: -35dB typ.
F3 Third Harmonic: -35dB typ.

You can find special 50-55V power supply for this amplifier here!

중요한:
– Ensure shielding between final stage and audio stage with exciter. Install a good feed-through capacitor on the supply +48V wiring feeding the power output stage. This will keep and RF from the power line.
– 과도한 드라이브 레벨은 이 앰프를 손상시킬 수 있습니다. 증폭기가 장착될 장비의 설계는 적절한 보호 회로를 예상해야 합니다.
– 증폭기 효율은 공급 전압의 함수이며, 최대 효율을 얻으려면 원하는 출력 전력의 함수로 공급을 줄이십시오. 일반적으로 효율과 고조파 방출 간의 최상의 절충안은 증폭기가 약 2-3dB의 게인 압축에서 작동할 때 얻어집니다.
– RF pallets are sensitive devices, if you do not have sufficient experience please consider a fully finished product instead. They can be burned by applying too much drive power, too high supply voltage, not using proper heatsink, using filter with unsufficient specifications, connecting mismatched loads or no load at all and also by soldering coax with too long leads. For this reason there is no warranty for any pallet. We do assure you that every pallet is tested and is 100% operational as it leaves our workshop.

Quantity discount is available and shipping becomes a lot cheaper per unit as quantity goes up. For additional info and prices please ask for a quote 여기.

메모: The pallet amplifier is shipped without the connectors shown on the photo and final design was altered somewhat (photo coming soon).