Deskripsi
Black edition with new high performance advanced display, backed by 5 years of warranty
The new Black Edition (BE+) series FM exciter brings completely new advanced graphics display with many new features such as web control interface, ethernet connectivity, two-color VU meter, smooth rotary button operation and full control over every aspect including RDS. Sharp low pass filter, great stereo separation, fantastic reliability and tight MPX control with several limiters were carried over from the previous models. With this new OLED display and new great looking enclosures with improved ventilation it seemed completely logical that warranty period would be extended to 5 years **.
This unit is perfect for demanding broadcasters. No tuning is necessary, design is entirely wideband. All you have to do is set the frequency and output power, the rest is optional. SWR, temperature and polarity protection make it difficult to destroy the unit. Unit is housed in a brand-new 1H professional 19″ rack, new design is lighter and RF tight (does not leak RF). It is rugged and made for 24/7/365 operation. Each unit has a wide-angle high contrast OLED display.
Those who use streaming sources to stream your audio will be happy to hear that as an option we also offer industry – standard streaming service receiver which also reads MP3 files from USB port at the back. What is even cooler is that the name of the stream or song name (if transmitted by stream operators) will be displayed on the display and also sent out with RDS. Instructions how to set this up are in the manual for the LCD display.
What’s new in BE version:
– Bright 122×32 graphical LCD with rotary encoder, USB and Ethernet ports.
– Classical two-color LED-based VU-meter and forward/reflected power indicator.
– Remote control via Ethernet and web browser as standard, possible even from mobile phone
– RDS fully configurable via OLED display and web interface
– RDS is also supported via industry-standard UECP interface
– RDS can now substitute special national characters by standard recognizable by all receivers (if desired)
– RBDS and RDS are both supported
– Time update via Internet to always ensure precise CT RDS time with very precise implementation of CT algorithm. With automatic daylight savings switching.
– Firmware of all sub-systems can be upgraded via USB interface. If we release an update or a new feature you will be able to install it.
– Optional streaming and Mp3 playback which can also transmit song name via RDS
– Calibrated two-color VU meters for power, reflected power and audio level
– Peningkatan kontrol level MPX (membatasi diperkenalkan di beberapa titik).
– MPX level adjustable from outside via a hole next to XLR connectors at the back
– 100 langkah penyesuaian daya
– Penyesuaian daya berbasis persentase (50% sekarang akan memberikan kira-kira setengah dari daya keluaran, V2 dapat memberikan hasil yang sangat mendekati)
– USB digital audio input (MPX mode now features 192KHz conversion rate)
– Optional AES/EBU in MPX audio input models (later it will also be available in stereo models)
– Konstruksi modular, sebagian besar modul dapat ditukar dengan mudah tanpa penyolderan
– Easy change of frequency or any parameters via display or web interface, friendly user interface
– Hemat biaya, hemat energi, ringan, kecil dan praktis
– 1W and 5W versions do not have any fan and are completely silent, 50W and 100W version have much better cooling than previous versions
Parameter apa yang dapat saya ubah melalui remote control?
Frequency, output power, various alarms, network parameters, time settings, audio input selection and levels, DSP parameter and RDS settings can be changed via Ethernet in web browser. No software installation is needed, just connect your transmitter to local Ethernet and open web browser to access all the settings. Check the manual for more info. Below is a small sample of the interface.
Bagaimana cara memasang pemancar, antena, dan sumber audio?
Lihat gambar di bawah (klik untuk memperbesar) untuk contoh stasiun radio yang bagus dengan beberapa item studio. Di bagian bawah halaman ini cari tautan ke item lain yang dapat Anda gunakan untuk mengatur stasiun radio Anda (APA LAGI YANG SAYA BUTUHKAN DAN TIDAK TERMASUK? dan APA YANG BISA SAYA GUNAKAN SEBAGAI SUMBER AUDIO?).
Spesifikasi teknis:
BAGIAN RF
– Output power: 1W to 100W depending on the model, easily adjustable via LCD display (100 steps)
– Impedansi keluaran 50 tidak seimbang, VSWR kurang dari 2:1 untuk keluaran penuh
– Konektor keluaran: BNC perempuan
– Rentang frekuensi 87,5 hingga 108MHz
– PLL step 50KHz
– RF Palsu > -85 dBc @ +- 1MHz min. keluar dari operator
– RF Harmonik > -60 dBc mnt, tipe -70dBc
– Led Pemantauan: Daya hidup, peringatan SWR/TEMP/PLL
– Kemampuan modulasi: FM
– RDS support: Yes
– RDS CT accuracy: -+0,1 seconds
– Supported RDS groups: PS, RT, CT, AF, EON, PTY, TA, TP, ECC, DI bits, UECP interface
BAGIAN AUDIO
– Konektor audio: BNC (input MPX), RCA, XLR dan USB
– Input audio USB 192KHz untuk versi MPX
– Level audio yang dibutuhkan: 4dBu (1.23Vrms @ 0db gain), -10dBu (0.316Vrms @ +14dB gain), dapat disesuaikan dalam rentang lebar
– Impedansi input audio: resistif 10Kohms, seimbang
– Pre-emphasis Flat, 50 atau 75usec
– Distorsi harmonik ( THD ) <0,1%
– Pemisahan stereo: >65dB
– Mode: Stereo/Mono, dapat disesuaikan melalui layar LCD atau jarak jauh dengan PC
– Amplitudo frekuensi: 0,5dB, 30Hz – 15kHz
UMUM
– Suhu sekitar: -5° hingga +45°C
– Power supply: 15V(ordered separately, current rating depending on power)
– Rak standar 19″1HE, kedalaman 125mm (sekitar 5″)
– Berat sekitar 4kg (volumetrik)
Note: BE units are available in 2 versions.
– Dengan input MPX (dari penerima STL atau prosesor DSP eksternal misalnya)
– Versi Stereo DSP/RDS dengan DSP stereo encoder plus RDS
| Nama model | DSP prosesor |
RDS prosesor |
XLR input |
Nama satuan lengkap |
| BE MPX | Tidak | Tidak | Ya | CyberMAXFM+ BE+ MONO MPX 192KHz USB |
| BE STEREO + RDS | Ya | Ya | Ya | CyberMaxFM+ BE STEREO DSP+RDS |
Apa yang termasuk?
– Pemancar
- Kabel USB
– Short Ethernet cable
– Mains power supply and mains cable must be ordered separately (they are listed below transmitters, get the one for your power level)! The reason is that these units can be battery powered (car battery for example), they are relatively common standard items and many have them already. Mains cables are standard desktop PC type and vary from country to country so we don’t know what type is used where you live (and sometimes in the end the unit ends up somewhere else, not where we ship it). Also, these are industry standard.
Berapa kisaran yang bisa saya harapkan?
Anda dapat membaca lebih lanjut tentang jangkauan dalam panduan ini DI SINI.
Apa itu RDS?
Sistem Data Radio, basically it displays station name and sometimes song name and similar information on a compatible radio receiver. Very popular in Europe
and also in the US.
IP audio streaming with MP3 playout from USB
This add-on card lets you receive internet audio streams or play MP3 files from USB drive. This is basically industry-standard Barix IP module inside your transmitter. Especially cool is that the stream source often also transmits song name and when this is the case the RDS encoder can also transmit song name and it can be displayed on the LCD. Read the manual to see how this is done.
APA YANG BISA SAYA GUNAKAN SEBAGAI SUMBER AUDIO?
– Mixer berkualitas tinggi dengan hibrida telepon, seperti unit yang sangat populer ini.
– Professional broadcasting microphone with noise-free stand
– Your PC. Just plug audio cable into your sound card. With some audio scheduling software.
– Pemutar CD, pemutar MP3 atau sistem reproduksi musik lainnya
APA LAGI YANG SAYA BUTUHKAN DAN TIDAK TERMASUK?
– Memerlukan steker listrik yang dapat dibeli di negara Anda (setiap negara memiliki steker listrik yang berbeda dan kami tidak membawa semuanya). Ini adalah steker listrik standar dan harganya biasanya sekitar 1 US$ atau kurang. Anda bisa mendapatkannya di toko electronics mana pun, seperti gubuk radio, kota sirkuit, toko komputer mana pun, dll. Selalu gunakan steker yang diarde untuk keselamatan Anda!
– Anda juga membutuhkan antena, Anda dapat memesannya DI SINI
– Anda juga akan kabel koaksial untuk menghubungkan antena dan pemancar, Anda dapat memesannya DI SINI (hingga 20m) atau DI SINI (20-60m) atau DI SINI (>60m).
– Kit Radio Esensial berisi berbagai konektor dan adaptor plus penganalisa antena, setiap stasiun harus memilikinya kapan saja.
– Anda memerlukan sumber audio (mixer, pemutar cd, mikrofon, dll.). Sebaiknya gunakan PC sebagai sumber audio dan jalankan beberapa jenis perangkat lunak penjadwalan audio, seperti Jazler, Raduga atau winamp. Plugin Winamp seperti rocksteady ada dan dapat membuat suara Anda menjadi lebih baik.
Di mana saya dapat membeli semua yang saya perlukan untuk memulai dalam satu paket, termasuk antena dan yang lainnya?
Anda dapat memeriksa kami Paket pemancar all-inclusive, ini termasuk antena, kabel koaksial dan catu daya listrik. Cara lain untuk pergi adalah memilih pilihan Anda antena di sini dan kabel koaksial dengan konektor here, this way you can configure your own package. Antenna accessories such an antenna analyzers are also very welcome. And of course lightning protection.
**For the warranty period of 5 years some conditions apply. Warranty does not cover final transistors and shipping cost, also natural disasters and mishandling are excluded.
Ulasan
Belum ada ulasan.