CYBER MAX FM+ BE+ 3000W

 3,49 3.699,99

Na zalihi
 3.599,99

Na zalihi

 3.699,99

Na zalihi

 239,99

Na zalihi

 179,99

Na zalihi

 3,99 7,99

Prikazane cijene su bez PDV-a (plaća se samo u EU)

Opis

Black edition with new high performance advanced display, backed by 5 years of warranty

The new Black Edition (BE+) series FM exciter brings completely new advanced graphics display with many new features such as web control interface, ethernet connectivity, two-color VU meter, smooth rotary button operation and full control over every aspect including RDS. Sharp low pass filter, great stereo separation, fantastic reliability and tight MPX control with several limiters were carried over from the previous models. With this new OLED display and new great looking enclosures with improved ventilation it seemed completely logical that warranty period would be extended to 5 years **.

This unit is perfect for demanding broadcasters. No tuning is necessary, design is entirely wideband. All you have to do is set the frequency and output power, the rest is optional. SWR, temperature and polarity protection make it difficult to destroy the unit. Unit is housed in a brand-new 3H professional 19″ rack, new design is lighter and RF tight (does not leak RF). It is rugged and made for 24/7/365 operation. Each unit has a wide-angle high contrast OLED display.

Those who use streaming sources to stream your audio will be happy to hear that as an option we also offer industry – standard streaming service receiver which also reads MP3 files from USB port at the back. What is even cooler is that the name of the stream or song name (if transmitted by stream operators) will be displayed on the display and also sent out with RDS. Instructions how to set this up are in the manual for the LCD display.

 

What’s new in BE version:
Bright 122×32 graphical LCD with rotary encoder, USB and Ethernet ports.
– Remote control via Ethernet via web browser as standard, possible even from mobile phone
– RDS fully configurable via OLED display or web interface
– RDS is also supported via industry-standard UECP interface
– RDS can now substitute special national characters by standard recognizable by all receivers (if desired)
– RBDS and RDS are both supported
– Built-in scheduler can change power 2x per day to any preset value you desire. Independent of any PC.
– Time update via Internet to always ensure precise CT RDS time with very precise implementation of CT algorithm. With automatic daylight savings switching.
– Firmware of all sub-systems can be upgraded via USB interface. If we release an update or a new feature you will be able to install it.
– Optional streaming and Mp3 playback which can also transmit song name via RDS
– Calibrated two-color VU meters for power, reflected power and audio level
– Poboljšana kontrola MPX razine (ograničenje uvedeno na nekoliko točaka).
– MPX level adjustable from outside via a hole next to XLR connectors at the back
– 100 koraka podešavanja snage
– Podešavanje snage temeljeno na postotku (50% će sada dati približno polovicu izlazne snage, V2 bi mogao dati vrlo približan rezultat)
– USB digital audio input (MPX mode now features 192KHz conversion rate)
– Optional AES/EBU in MPX audio input models (later it will also be available in stereo models)
– Modularna konstrukcija, većina modula može se lako zamijeniti bez lemljenja
– Easy change of frequency or any parameters via display or web interface, friendly user interface
– Cost effective, energy efficient and practical

Koje parametre mogu promijeniti putem daljinskog upravljača?
Frequency, output power, various alarms, network parameters, time settings, audio input selection and levels, DSP parameter and RDS settings can be changed via Ethernet in web browser. No software installation is needed, just connect your transmitter to local Ethernet and open web browser to access all the settings. Check the manual for more info. Below is a small sample of the interface.

Web interface for CyberMaxFM+ Black Edition FM transmitters
Web interface for CyberMaxFM+ Black Edition FM transmitters

Kako spojiti odašiljač, antenu i audio izvore?
Pogledajte sliku ispod (kliknite za povećanje) za primjer lijepe radio postaje s nekim studijskim artiklima. Na dnu ove stranice potražite poveznice na druge stavke koje možete koristiti za postavljanje vaše radio postaje (ŠTO ĆE MI JOŠ TREBATI, A NIJE BILO UKLJUČENO? i ŠTO MOGU KORISTITI KAO IZVOR ZVUKA?).

Kliknite za povećanje

Tehničke specifikacije:
RF SEKCIJA
– Output power: ~3KW, adjustable via LCD display (0 to max in 100 steps)
– Izlazna impedancija 50 neuravnotežena, VSWR manji od 2:1 za puni izlaz
– Izlazni konektor: 7/16 ženski
– Frekvencijski raspon 87,5 do 108MHz
– PLL step 50KHz
– Lažni RF > -85 dBc @ +- 1MHz min. izvan nosača
– RF harmonici > -60 dBc Standard
– LED za nadzor: uključeno, SWR/TEMP/PLL upozorenje
– Mogućnost modulacije: FM
– RDS support: Yes
– RDS CT accuracy: -+0,1 seconds
– Supported RDS groups: PS, RT, CT, AF, EON, PTY, TA, TP, ECC, DI bits, UECP interface

AUDIO SEKCIJA
– Audio priključci: BNC (MPX ulaz), RCA, XLR i USB
– 192KHz USB audio ulaz za MPX verziju
– Potrebna razina zvuka: 4dBu (1,23Vrms @ 0db pojačanje), -10dBu (0,316Vrms @ +14dB pojačanje), podesivo u širokom rasponu
– Audio ulazna impedancija: 10 Kohma otporna, uravnotežena
– Pre-emphasis Flat, 50 ili 75 usek
– Harmonijska distorzija (THD) <0,1%
– Stereo odvajanje: >65dB
– Način rada: Stereo/Mono, podesiv putem LCD zaslona ili daljinski putem računala
– Amplituda frekvencije: 0,5dB, 30Hz – 15kHz

OPĆENITO
– AC mrežno napajanje: 220-240V 50/60Hz
– Temperatura okoline: -5° do +45°C
– Vanjske dimenzije 3000 W (Š x D x V) 19″ x dubina (550 mm) x visina 3HE (132 mm)
– Fizička težina 35Kg
– Volumetrijska težina do 30Kg

Note: BE transmitters are available in 2 versions.
– S MPX ulazom (iz STL prijemnika ili vanjskog DSP procesora na primjer)
– Stereo DSP/RDS verzija s DSP stereo koderom plus RDS

Ime modela DSP
procesor
RDS
procesor
XLR
ulazi
Puni naziv jedinice
BE MPX Ne Ne Da CyberMAXFM+ BE+ MONO MPX 192KHz USB
BE STEREO + RDS Da Da Da CyberMaxFM+ BE STEREO DSP+RDS

Što je uključeno?
– Odašiljač
- USB kabl
– Short Ethernet cable
– Mains power supply and mains cable must be ordered separately (they are listed below transmitters, get the one for your power level)! The reason is that these units can be battery powered (car battery for example), they are relatively common standard items and many have them already. Mains cables are standard desktop PC type and vary from country to country so we don’t know what type is used where you live (and sometimes in the end the unit ends up somewhere else, not where we ship it). Also, these are industry standard.

Koliki raspon mogu očekivati?
Više o rasponu možete pročitati u ovom vodiču OVDJE.

Što je RDS?
Radio podatkovni sustav, basically it displays station name and sometimes song name and similar information on a compatible radio receiver. Very popular in Europe and also in the US.

IP audio streaming with MP3 playout from USB
This add-on card lets you receive internet audio streams or play MP3 files from USB drive. This is basically industry-standard Barix IP module inside your transmitter. Especially cool is that the stream source often also transmits song name and when this is the case the RDS encoder can also transmit song name and it can be displayed on the LCD. Read the manual to see how this is done.

ŠTO MOGU KORISTITI KAO IZVOR ZVUKA?
– Visokokvalitetni mikser s telefonskim hibridima, kao što su ovu vrlo popularnu jedinicu.
– Professional broadcasting microphone with noise-free stand
– Your PC. Just plug audio cable into your sound card. With some audio scheduling software.
– CD player, MP3 player ili bilo koji drugi sustav za reprodukciju glazbe

ŠTO ĆE MI JOŠ TREBATI, A NIJE BILO UKLJUČENO?
– Potreban je mrežni utikač koji se može kupiti u vašoj zemlji (svaka država ima drugačiji mrežni utikač i ne nudimo sve). Ovo je standardni mrežni utikač i njegova cijena je obično oko 1 US$ ili manje. Možete ga nabaviti u bilo kojoj trgovini electronics, kao što je radio kućica, okružni grad, bilo koja trgovina računalima itd. Uvijek koristite uzemljeni utikač za vašu sigurnost!
– Trebat će vam i antena, možete je naručiti OVDJE
– Dobit ćete i koaksijalni kabel za spajanje antene i odašiljača, možete ga naručiti HERE (up to 20m) ili OVDJE (20-60m) ili OVDJE (>60m).
– Radio Essentials Kit sadrži razne konektore i adaptere plus analizator antene, svaka bi ih stanica trebala imati pri ruci u bilo kojem trenutku.
– Trebat će vam audio izvor (mikser, cd player, mikrofon itd.). Dobra je ideja koristiti računalo kao izvor zvuka i pokrenuti neku vrstu softvera za raspoređivanje zvuka, kao što su Jazler, Raduga ili winamp. Winamp dodaci kao što je rocksteady postoje i mogu učiniti vaš zvuk još boljim.

Gdje mogu kupiti sve što mi treba za početak u paketu, uključujući antenu i sve ostalo?
Možete provjeriti naše Sveobuhvatni paketi odašiljača, to uključuje antenu, koaksijalni kabel i mrežno napajanje. Drugi način bi bio odabir željenog antena ovdje i koaksijalni kabel s konektorima here, this way you can configure your own package. Antenna accessories such an antenna analyzers are also very welcome. And of course lightning protection.

Ovisno o modelu, ova jedinica daje ~ 3000 W čiste RF snage, točna izlazna snaga može varirati oko +/- 10% ovisno o frekvenciji, temperaturi okoline i podudaranju antene.

**For the warranty period of 5 years some conditions apply. Warranty does not cover final transistors and shipping cost, also natural disasters and mishandling are excluded.

 

 

Dodatne informacije

CYBERMAXFM+ SE V2 priručnik koji vrijedi i za SE V3
https://www.pcs-electronics.com/software/2018/manual_cybermaxfmSE2_en.pdf
(V3 donosi funkciju Expander koja se može koristiti za pojačavanje tihog zvuka. Zadana postavka od 1:1 znači da je ekspander onemogućen, postavka od 1:2 daje maksimalno pojačanje. Ova je funkcija izvrsna za drive-in kina kako bi malo pojačala tihe dijelove malo.)

Evo programa za daljinsko upravljanje ovom jedinicom s računalom (RS232 ili USB) za SE+ V3:
https://www.pcs-electronics.com/software/2013/CyberMaxFM_v64_Setup.exe

Ovdje je upravljački program za USB priključak za XP, W2K, Vista i Windows7

 

Ovdje je upravljački program za USB priključak za XP, Vista i Windows7 koji bi trebao raditi i na 64:

I konačno USB drajver za Windows 10

Preporučujemo ovaj vodič jer objašnjava mnoge korisne stvari za bilo koju FM radio postaju.
Odjeljak posvećen postavljanju softvera također je od velike pomoći

Za korištenje Etherneta preuzmite i instalirajte ovaj program.

Recenzije

Još nema recenzija.

Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.