PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Arriba » Catálogo » FM amplifiers » Pallet FM Amplifiers » Mi cuenta  |  Contenido del carrito  |  Procesar pedido   
Nuestros productos
FM transmitters->
AM transmitters
Special sale items
RF accesories for transmitters->
FM amplifiers->
  Complete FM amplifier modules
  Pallet FM Amplifiers
  Rack mounted FM amplifiers
FM radio antennas
TV Transmitters->
TV amplifiers->
TV antennas
Coaxial cable and connectors
Enlaces audio/video
RDS Encoders
Stereo encoders
Electronic components->
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcast->
RF service and design
Basic Studio (mixer and microphone)
Basic Studio (mixer and microphone)
Nuestras guías de radio
Guía Cómo empezar
Preguntas más frecuentes
Making Your Own Transmitter
Cable coaxial
Equipo de audio
Nuevos esquemas
Fuente de alimentación
Lecturas recomendadas
Acerca de PCS Electronics
Envíos y devoluciones
Stock actual
Frecuentas más frecuentes
Póngase en contacto con nosotros
Aviso de privacidad
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Preguntas más frecuentes (FAQ) sobre los vales de regalo
Información de protección

PayPal and credit cards accepted!
High gain 15W/35W/50W/70W FM pallet amplifier with 12V LDMOS  

High gain 15W/35W/50W/70W FM pallet amplifier with 12V LDMOS

This pallet has been designed for applications requiring low supply voltage (10-15V) and very high gain. It can produce full output power from just a few milliwatts of drive power, a small VCO is already sufficient.

Each pallet amplifier we sell is designed and tested using vector network analyzer and spectrum analyzer. Our amplifier products are manufactured using an automatic surface mount assembly process.
This pallet is optimized for 10-15V operation and is perfect for battery-powered mobile applications and solar powered applications. Using a lower voltage will result in lower output power.
It is well suited as a driver stage and it will operate down to about 10 volts. RF output power can be adjusted by lowering the supply voltage. Some models (15W and 35W) also feature output power adjustment trimmer and 0-5V DC signal can be used to set output power. To use this function remove the power adjustment trimmer and connect control voltage to the control pins.
As with any pallet you will need a heatsink, power supply and filter to use it.
More information is available in the included amplifier data sheet.

Due to high gain the 15W and 35W pallets can be powered practically from the VCO, an isolation stage and shielding are recommended for stability. Practically any source you can imagine will be strong enough to drive this pallet amplifier.

Technical specifications:
- FM band, 87.5MHz to 108MHz, will work from 80 – 120MHz at reduced power (also available for 144MHz and other frequency bands, email for info)
- Input/output 50 ohms.
- Pout: 15W; 35W, 50W or 70W typical depending on the model
- Drive power required: 0.1mW-5mW (15W and 35W)
- Drive power required: 1W (50W and 70W)
- Requires 10-15Vdc (15W/2,5A, 35W/5A, 50W/6A max, 70W/8A)
- No bias adjustments or RF circuit tuning is required.
- Size v1 15W: 85x75mm, 25mm high
- Size v2 15W: 76x62mm, 18mm high
- Size v2 35W: 76x62mm, 18mm high
- Size v2 50W: 76x62mm, 18mm high
- Size v2 70W: 76x62mm, 18mm high

You can find suitable filters here.
Suitable mains power supply are here.
A heatsink used for this pallet can be used as well, scroll to the bottom.

Warning: Do not exceed maximum supply voltage of 15V or damage will occur.

Note 1: Please use teflon coaxial cable for RF input (RG178 is perfect) and output (RG178 or RG142 are perfect) connections, this makes it possible to have very short leads without burning the coax. Keep the coax leads as short as possible (few mm at most). Also keep leads short on connectors, this  N female flange for RG142 or .141 semirigid - easy install is perfect! 

Note 2: A small heatsink is definitely needed!

Este producto se añadió a nuestro catálogo el Tuesday 29 March, 2011.
 *Por favor, seleccione la cantidad de cada artículo que desea encargar y pulse el botón 'Añadir al carrito' a continuación.
Mostrando de 1 hasta 4 (de 4 productos) Páginas de resultados:  1 
    Nombre   Modelo   Efectuar la selección   Precio 
High gain 15W v2 FM pallet amplifier  High gain 15W v2 FM pallet amplifier     39.99EUR
High gain 35W v2 FM pallet amplifier  High gain 35W v2 FM pallet amplifier     54.99EUR
50W v2 FM pallet amplifier (Batch of 5)  50W v2 FM pallet amplifier (Batch of 5)   12V (2xLDMOS)  489.99EUR
70W v2 FM pallet amplifier  70W v2 FM pallet amplifier   True 12V 2x LDMOS  No está en stock 169.99EUR
Mostrando de 1 hasta 4 (de 4 productos) Páginas de resultados:  1 
Carrito de la compra
0 artículos
Búsqueda rápida

Use palabras clave para encontrar el producto que está buscando.
Visite nuestro foro
Últimos artículos:

Pulse para entrar al foro
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce

Otras monedas

Póngase en contacto con nosotros | Acerca de PCS Electronics | Soporte | Frecuentas más frecuentes | Guía Cómo empezar | Envíos y devoluciones
Todos precios en US$ | Todos precios en EURO | Manuales, software y soporte

Todo el texto de este sitio, las descripciones de los productos, las guías y guiones son
Copyright © de PCS Elektronik d.o.o.
Basado en osCommerce