5W, 15W, 25W, 50W AND 100W CYBERMAXFM+ SE V3 DRIVE-IN-CINEMA FM PACKAGE

Manuals and drivers for all products, erratas, problem report and solutions and related topics...

Moderators: Nina, pcs, 5r, Boris

Post Reply
User avatar
pcs
Site master
Site master
Posts: 3136
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

5W, 15W, 25W, 50W AND 100W CYBERMAXFM+ SE V3 DRIVE-IN-CINEMA FM PACKAGE

Post by pcs »

5W, 15W, 25W, 50W and 100W FM TRANSMITTER PACKAGES FOR DRIVE-IN CINEMA AND TRANSLATION!

Can also run off the batteries (12-15V), practical for mobile or solar powered installations

This package is based on our CyberMaxFM+ SE V3 rack mounted FM transmitter series for demanding broadcasters operating in the 87.5 to 108MHz band. It contains our reliable FM transmitter with optional DSP stereo and RDS, an antenna, coaxial cable and all connectors. A perfect FM transmitter for a regular licensed radio station, drive-in cinema, church, medium size radio station, campus radio or a religious radio. Very suitable for portable or improvized installations and small radio stations, advertising (housing, shops), special occasions, drive-in cinema wireless sound distribution, translation, tourism…. Protected with Temp and SWR protection. It can also serve to drive an amplifier of any power.

Here is a guide to setting up FM transmitter for drive-in cinema:
https://www.pcs-electronics.com/softwar ... ronics.pdf

You can purchase this product here:
https://www.pcs-electronics.com/shop/fm ... m-package/

ADVANTAGES
– Frequency and power fully adjustable via LCD (from zero to max for given model)
– Excellent audio quality and stereo separation (V3 with SE8000 DSP+)
– Improved DSP compressor for high dynamic range handling (much improved in V3)
– New Expander mode especially for movies (boosts quiet sections)
– USB audio input for direct connection to PC or laptop
– XLR and RCA audio inputs
– Optional Ethernet IP audio streaming and remote control
– Optional RDS available
– High quality ESD protected RF hardened balanced inputs
– Enough power for up to 10km of range with good antenna and location on a mountain top
– Includes coaxial cable, mains power supply and antenna!

DISADVANTAGES

Hardly any

RANGE AND POWER SELECTION

Exact range depends a lot on terrain configuration, type of antenna and especially the location of the antenna and of course quality of receivers. Even 1W is often enough for drive-in cinema but sometimes there could be interference sources and overpowering them can require more power. 15W is a good selection with 25W giving you extra piece of mind. Sometimes you just need more power and there 50W and 100W definitely get the job done. You can set power anywhere from zero to max with LCD display/keys, there are 100 steps. Even 100W transmitter can be set down to 1W.

BE SAFE, GET A BACKUP
Our transmitters are very reliable but something can always go wrong. Ever dropped something? Spilled coffee over keyboard? A backup system, even if at 1W only, can save your face and keep your customers satisfied even if the unthinkable happens. Once your customers start rolling in you will be very glad you have a backup.

WHAT’S INCLUDED?

5W, 15W, 25W, 50W or 100W CyberMaxFM+ SE transmitter with DSP stereo encoder (RDS can be ordered separately as an option)
– Mains power supply for the transmitter (may require your local mains cable, same as used for PC computer)
– 5W transmitter ships with sleeve dipole antenna (includes a mounting clamp), gain is roughly -1 dBd.
– 15W, 25W, 50W and 100W transmitters ship with wideband GP antenna (includes mounting material, clamps). No tuning is required, gain is roughly -1 dBd.
– 50W and 100W transmitters have BNC to N female adapter included
– 5m (16 feet) of coaxial cable with matching connectors installed for all antenna types

Technical specifications:
RF SECTION
– Output power: 5W, 15W, 25W, 50W, 100W depending on the model, easily adjustable via LCD display (100 steps)
– Output impedance 50 unbalanced, VSWR less than 2:1 for full output
– Output connector: BNC female
– Output connector: 50W and 100W: 50W and 100W models also have adapter from BNC to N female
– Frequency range 87.5 to 108MHz
– PLL step 100KHz
– RF Spurious > -85 dBc @ +- 1MHz min. out of carrier
– RF Harmonics > -60 dBc min, -70dBc typ
– Monitoring Led: Power on, SWR/TEMP/PLL warning
– Modulation capability: FM

AUDIO SECTION
– Audio connectors: BNC (MPX model) plus RCA and XLR (stereo version)
– USB audio input
– Audio level required: 4dBu (1.23Vrms @ 0db gain), -10dBu (0.316Vrms @ +14dB gain), adjustable in wide range
– Audio input impedance: 10Kohms resistive, balanced
– Pre-emphasis Flat, 50 or 75usec
– Harmonic distortion ( THD ) <0.1%
– Stereo separation: >65dB
– Mode: Stereo/Mono, adjustable via LCD display or remotely with PC
– Frequency amplitude: 0.5dB, 30Hz – 15kHz

GENERAL
– Ambient temperature: -5° to +45°C
– Power supply: 15V 3A min for 15W, 5A min for 25W
– Power supply: 15V 7A min for 50W, 10A min for 100W
– Standard 19″1HE rack, 125mm deep (about 5″), 4kg (volumetric)
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply