Hi all.
I have two new 2SC1972 transistores that im not using.
What i would like to know is if any of you know of, or could draw me up some simple schematics, For a 88-108 amp that will use both transistores combined for 28 Watt of output, Or if they canot be combined a schematic for using just one.
The drive will be my transmiter that has a 2SC1971 in the final output.
Thanks in advance
2 X 2SC1972's What to do with them
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
thanks pcs i did see that erlier but didnt think it was sutable as 2SC1972 is not listed.
How would i hook up both the transisters. I was thinking side by side with both transisters B,C,E leading to the same traks on the PCB, Is this logical and if so would the 7 W output of my transmitter drive both 2SC1972 ok.
Thanks for your help.
Oh one last thing.
Is ther any way of home making a VK200, Alo could you tell me what 0.8MM CUL meens
How would i hook up both the transisters. I was thinking side by side with both transisters B,C,E leading to the same traks on the PCB, Is this logical and if so would the 7 W output of my transmitter drive both 2SC1972 ok.
Thanks for your help.
Oh one last thing.
Is ther any way of home making a VK200, Alo could you tell me what 0.8MM CUL meens