Universal control board v4.0 and FM, VHFTV and DAB+ amplifie

Manuals and drivers for all products, erratas, problem report and solutions and related topics...

Moderators: Nina, pcs, 5r, Boris

Post Reply
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Universal control board v4.0 and FM, VHFTV and DAB+ amplifie

Post by pcs »

Universal Amplifier Control Board v4.0, used in all our RF amplifiers


The product is listed here:
https://www.pcs-electronics.com/univers ... -2946.html

Manual will soon be here:
https://www.pcs-electronics.com/softwar ... rd4_en.pdf

You can download windows application here:
https://www.pcs-electronics.com/softwar ... AmpV30.exe

Latest update:
https://www.pcs-electronics.com/softwar ... xAmp41.exe

Just download and run instead of the one old one from v3.0

Here is the driver for USB port for XP, W2K, Vista and Windows7:
https://www.pcs-electronics.com/softwar ... driver.zip
This lets you use the USB communication with cybermax micro.

Here is the driver for USB port for XP, Vista and Windows7 that should work in 64 as well:
https://www.pcs-electronics.com/softwar ... omPort.exe

Are you getting this error message:
"Component 'mscomctl.ocx' or one of its dependencies not correctly registered: a file is missing or invalid "
Here is the solution, download the file from this microsoft webpage here:
http://www.vistaheads.com/forums/micros ... basic.html
Install that exe file, it installs common VB libraries and thereby eliminates the error.

Features:
- Supports 17V-55V mains power supply units.
- Slow power up (soft start),
- Falling/rising mode selection
- 2 temperature meters with two temp alarms
- 4 voltage meters (requires 2 sensor boards, only 1 ships with the unit)
- 4 current meters (requires 2 sensor boards, only 1 ships with the unit)
- RF drive bargraph with alarm
- Provides positive and negative bias disable signals and control voltage
- Three levels of directional coupler sensitivity
- Supports digiamp interface (same as max pro exciters

Technical specifications::
- Mains PSU output voltage: 17-55V
- On board DC/DC: 12-15V stabilized, 2A
- Power/SWR readout range: 5KW max (ask for upgrade)
- Power control mechanism
What is included:
- Control Board V4.0
- LCD control module 4x16 large
- 2x 10K temperature sensor, not wired
- UI sensor board, one piece, with 6-pin flat cable



Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply