CYBERMAXFM+ SE V2 and V3 manual and software

Manuals and drivers for all products, erratas, problem report and solutions and related topics...

Moderators: Nina, pcs, 5r, Boris

Post Reply
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

CYBERMAXFM+ SE V2 and V3 manual and software

Post by pcs »

CYBERMAXFM+ SE V2 manual which also holds for SE V3
https://www.pcs-electronics.com/softwar ... SE2_en.pdf
(V3 brings Expander functionality which can be used to boost quiet audio. Default setting of 1:1 means expander is disabled, a setting of 1:2 gives maximum boost. This function is great for drive-in cinemas to boost quiet sections a little bit.)


Here's a program to control this unit remotely with a PC(RS232 or USB) for SE+ V2:
https://www.pcs-electronics.com/softwar ... _Setup.exe

Here's a program to control this unit remotely with a PC(RS232 or USB) for SE+ V3:
https://www.pcs-electronics.com/softwar ... _Setup.exe

Here is the driver for USB port for XP, W2K, Vista and Windows7:
https://www.pcs-electronics.com/softwar ... driver.zip

Here is the driver for USB port for XP, Vista and Windows7 that should work in 64 as well:
https://www.pcs-electronics.com/softwar ... omPort.exe

And finally a USB driver for Windows 10:
https://www.pcs-electronics.com/softwar ... _Drive.zip

We recommend this guide as it explains many useful things for any FM radio station.
Section dedicated to software setup is also very helpfull:
https://www.pcs-electronics.com/softwar ... ronics.pdf


To use Ethernet download and install this program:
https://www.pcs-electronics.com/softwar ... alPort.exe
When you order this feature you also receive serial number, if you did not please email with your order number and we will give you serial number.
Last edited by pcs on Sun Mar 28, 2021 11:19 pm, edited 6 times in total.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

If you have SE2 or SE3+ with RDS purchased before October 15th, you may want to apply this fix to RDS encoder.
A problem manifests as digital noise, noticeable usually when no audio is played and volume is opened way up.

Image

A resistor needs to be replaced by 1nF capacitor (it can also be 470pF capacitor).
You can purchase it online, it only costs about 0.2 eur.
https://uk.farnell.com/avx/06035a102fat ... 0603%20npo

We sincerely apologize for this bug, all new units ship without it.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

SE V3 driver update

Post by pcs »

The link is in the first post. Entire setup has been updated as well now that the bugs have been ironed out.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply