Manuals for discontinued models

Dogen · Post by **Dogen** » Wed Sep 05, 2007 7:10 pm

Hi Marko,

Could you post the manuals for your old/discontinued products such as the MaxPro I, SE3, CyberMax LCD, etc.?

Thanks!

Post by **pcs** » Thu Sep 06, 2007 10:19 am

Just email me and I will attach them to reply. Make sure your inbox is big.

You can also ask for manuals here (add a reply to this thread) and I will try to
post them here for everyone.

Kasozi Charles Bukenya · Tue Nov 04, 2008 7:10 pm

Hi Marko,

Could you post the manual for your old/discontinued product such as the 150w RF Amplifier not this one with mosofet. I failed to get mine it was on a cd.

Kasozi Chales Bukenya

Post by **pcs** » Tue Nov 04, 2008 7:35 pm

Hey,

can you e-mail me? I think you have my direct email, we chated before.

I have it somewhere on the disk and I will forward with reply to your email.

How are you doing otherwise? Its been a while.

kellya · Post by **kellya** » Wed Jan 26, 2011 6:24 pm

Hi there, I need a manual for the max pro 1 and se-1 please. I've looked but cannot find them. Thank you - Kelly

Post by **pcs** » Thu Jan 27, 2011 12:29 am

Big enough mailbox?

kellya · Post by **kellya** » Thu Jan 27, 2011 1:00 am

yahoo account should work. Thanks Marko! please send.

Post by **pcs** » Thu Jan 27, 2011 1:01 am

kellya · Post by **kellya** » Thu Jan 27, 2011 2:03 am

Thanks Marko, got them but I need the manual for the maxpro1 with the jumpers to set the freqeuncy. I don't have the new version with the lcd display. Thanks again - Kelly

Post by **pcs** » Thu Jan 27, 2011 11:26 am

Check your inbox

ibroze · Post by **ibroze** » Wed Sep 04, 2013 9:40 pm

Hi Marko,
Can you post a scheme and a list of parts needed to produce stereo encoder SE-1.
I have your PCB.
Best regards from Zenica.

Post by **pcs** » Thu Sep 05, 2013 9:27 am

Hi,

check your email.

azerty.nick · Post by **azerty.nick** » Thu Sep 19, 2013 3:56 pm

Hi Marko,
I have a question about the legacy Max pro I

The MENU button (the third one starting from the top) is not working like the manual says. It should toggle between TEST, TUNE-UP and LOCK MONITOR but I only have a Pxx.x on the screen.
I tried different combinaisons (MENU + UP, MENU + DOWN, MENU MENU...) but still the same.
Do you have any idea?
Best regards

Nicolas

Post by **pcs** » Thu Sep 19, 2013 7:04 pm

Tune up was in early models, you have more modern version.

azerty.nick · Post by **azerty.nick** » Fri Sep 20, 2013 10:29 am

Ok.
And another point is about the frequency. The real output frequency is a bit lower than the one that is set. Ex: I set 100Mhz but I need to tune to 99.95Mhz on my tuner to have stereo and tuned OK.
Can I fix that by tuning?
Best regards

Nicolas

Post by **pcs** » Fri Sep 20, 2013 10:39 am

The board you have is 15 years old

There is a cap next to xtal, replace it with a trimmer and set the frequency where you want it.

azerty.nick · Post by **azerty.nick** » Fri Sep 20, 2013 11:08 am

could you tell me the name of the capacity to replace and the value of the trimmer to put instead?
thanks

Regards.

Nicolas

Post by **pcs** » Fri Sep 20, 2013 12:42 pm

Email me with photo of your board, I need to see which model you have.

azerty.nick · Post by **azerty.nick** » Fri Sep 20, 2013 3:33 pm

Hi uploaded a picture here:
http://dl.free.fr/kvgoNZdGO

Regards.

Nicolas[/img]

Post by **pcs** » Fri Sep 20, 2013 4:04 pm

Its not working, why not email?

PCS-Electronics

Manuals for discontinued models

Manuals for discontinued models

Manual for old discontinued 150w rf amp

Box

Max Pro I