Antenna analyzer versus regular SWR meter

Discuss antenna construction, problems, tuning, designs...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
User avatar
pcs
Site master
Site master
Posts: 3131
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Antenna analyzer versus regular SWR meter

Post by pcs »

You may be wondering what is the benefit of using these fancy graphical antenna analyzers versus the regular SWR meter.
http://www.pcs-electronics.com/graphica ... -1553.html

Image

1.) The main advantage is that you don't need a transmitter to tune the antenna. This way your transmitter is entirely safe and is never exposed to high levels of SWR which as you know can damage the output stage (expensive fets/transistors).

2.) Further advantage is that you can see where your antenna is resonant.
- If its resonant above your target frequency you know that you need to extend the antenna's radiating element. > make it longer
- If its resonant below your target frequency you know that you need to shorten the antenna's radiating element > make it shorter
- Once the minimum of the graph is exactly at your target frequency you can try and manipulate any other tuning elements to get even lower SWR.

It is possible to obtain perfect SWR in very short time and after tuning 2-3 antennas you will really learn to appreciate these analyzers.

Hope this post clears out some issues.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply