After replacing my transistor the things who are on the image bellow were burned.
There is any text on them and i dont understand with wich things i can replace them.Please help me
photo - http://www.bistrec.eu/images/PCIMAX2007+%20burn.jpg please help
I have a question PCIMAX 2007+
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
I believe these were 1R resistor.
If you haven't upgraded yet I recommend that you look at PCIMAX 3000+,
you will find that the performance was massively improved.
If you haven't upgraded yet I recommend that you look at PCIMAX 3000+,
you will find that the performance was massively improved.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
information
I want more information about resistors-type, resistance, power and so on
Standard 1206 SMD 1 ohm resistor
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128