Is it possible to reduce the 19KHz pilot level?. I can hear it on the radio and I think it has been increasing since I bought it.
Thank you.
SE4 DSP Stereo Encoder 19KHz pilot output level
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
I can show you which resistor to change.
Which version of the board do you have? Does it look
the same size as this:
http://www.pcs-electronics.com/se5000-s ... -1274.html
SE4 is pretty old, huge improvement was made in the 5000 model.
Which version of the board do you have? Does it look
the same size as this:
http://www.pcs-electronics.com/se5000-s ... -1274.html
SE4 is pretty old, huge improvement was made in the 5000 model.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Can you at least write here the dimensions of the board so I can identify which model it is?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Hi Carlos,
behind the pilot phase trimmer towards attiny26 there is a 223 resistor, do you see it?
You can replace this with 100K trimmer and you will be able to set pilot level.
Good idea is to get precision 100K or 200K trimmer, such as this blue 10K for phase,
and glue it to the 10K with fast glue for stability.
Than you can set it practically down to zero.
Hope this helps. If not it is time to upgrade to SE 5000 DSP+, much better.
behind the pilot phase trimmer towards attiny26 there is a 223 resistor, do you see it?
You can replace this with 100K trimmer and you will be able to set pilot level.
Good idea is to get precision 100K or 200K trimmer, such as this blue 10K for phase,
and glue it to the 10K with fast glue for stability.
Than you can set it practically down to zero.
Hope this helps. If not it is time to upgrade to SE 5000 DSP+, much better.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128