Hi everyone
Just one question: according to the online doc, SE4 DSP threshold can be set at -12dB for example. But mine can only jump to -18dB. So, the compression works a little bit too early... Is there any way to modify this?
Regards
SE4 DSP settings
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
You have to kinda play with the three buttons(UP, DOWN, MENU) to get the settings you want. They seem to be a bit touchy, and you can actually effect several changes with only one "Press" of the button. Try again a couple of times, and you should be able to get it down to -12dB.
I think that the code in the uCPU needs to have a "De-bounce" routine, or if it already has one, the de-bounce delay needs to be increased.
Perhaps Marko will read this post and comment...
I think that the code in the uCPU needs to have a "De-bounce" routine, or if it already has one, the de-bounce delay needs to be increased.
Perhaps Marko will read this post and comment...