RDS MAX3.0 broken (think Atmel)

[Yagi]

Big bummer today, after many hours of labour my SE4+ and RDS MAX where almost build in a cabinet...
What wend wrong is still a puzzle, but suddenly my RDS was gone and the red led isn't flashing anymore

So i think the Atmel of the RDS is gone... i still can measure crystal activity and it gets 5volts (4.58v) but still no go.

Is there more i can check? and is there a possibility to get a new Atmel?
(or send this one if reprogramming is stil possible)

Please help as you can see on the picture i did to much work to switch to another RDS.

Grtzz Yagi

[pcs]

Email me directly and we'll discuss it. I recommend an upgrade to rds max 4000+,
there is a rebate for rdsmax 30 owners. It is exactly the same size however it
has been completely redesigned and really is worth the upgrade.

Marko

[Yagi]

Thanks Marko, i send you a PM hope to hear.

Grtzz Yagi

[pcs]

One thing, if you have RDSMAX30 off for a very long time, the battery can discharge
completely and you will have a problem. In such cases leave it on over night to charge
completely, than try again.

[tidy]

Email me directly and we'll discuss it. I recommend an upgrade to rds max 4000+,
there is a rebate for rdsmax 30 owners. It is exactly the same size however it
has been completely redesigned and really is worth the upgrade.

Marko

do you still do the rebate ?

[pcs]

Email me and I will arrange something.

[ec7eap]

RDSMAX30 off for a very long time, the battery can discharge pliz otrokiko@hotmail.com

[pcs]

3.0 is quite old.

I recommend that you upgrade to RDSMAX 4000+, it is a much better product.

Alternative would be to send 3.0 here for service. But the extra features of 4000+
make it a worthwhile upgrade.

[ec7eap]

RDS MAX 30 updated firmware
old plis 2005 otrokiko@hotmail.com

[ec7eap]

sorry just nesecito RDS MAX 2.0 Firmware
if pied mail telling me just that thanks otrokiko@hotmail.com

[pcs]

RDSMAX 3.0 firmware cannot be updated, there is no firmware update available.