Max Pro III - RDS Issue
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Max Pro III - RDS Issue
Hi, Jusr recently purchased the Max III 15w Transmitter with RDS. It runs from RDS Max V3.0. My issue is that the computer needed to run the software has 2 coms ports 8 and 9. The software needs comms ports 1 to 4. Is there any way I can alter to have comms ports 8 or 9 included in the list of available ports?
There sure is.
Open regedit and search for: RDS MAX v 3.0
Open the key under it, named pcs electronics
There are all of the settings rds max program saves into registry.
Look for comselected and click on it, enter 5-8, enter and close
registry. Should work. Do not open setup now in program or it'll
jump back to 1-4.
I'll add more com ports with new version, fot the time being this
should be a 100% fix.
Open regedit and search for: RDS MAX v 3.0
Open the key under it, named pcs electronics
There are all of the settings rds max program saves into registry.
Look for comselected and click on it, enter 5-8, enter and close
registry. Should work. Do not open setup now in program or it'll
jump back to 1-4.
I'll add more com ports with new version, fot the time being this
should be a 100% fix.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
RDS Port Issue
Thanks Mark your solution has worked fine!
John
John