Output Toriods
Posted: Sun Jul 09, 2017 11:37 pm
I have an AM Max II which was used as an oscillator buffer in a MW-5 and I am now looking to use it as a low power standby somewhere else.
It appears to have been built from a kit and then modified.
The Toroids are missing, they have been replaced by a large capacitor and I am pretty sure this won't work when we apply modulation.
No schematic or parts list available but someone must know the value of these inductors.
I can work out the circuit and what each section does.
The inductors are part of the final filter.
Hopefully someone has a complete one, and maybe a list of parts.
regards
Robert
It appears to have been built from a kit and then modified.
The Toroids are missing, they have been replaced by a large capacitor and I am pretty sure this won't work when we apply modulation.
No schematic or parts list available but someone must know the value of these inductors.
I can work out the circuit and what each section does.
The inductors are part of the final filter.
Hopefully someone has a complete one, and maybe a list of parts.
regards
Robert