Page 1 of 1
schematic from the AM MAX II transmitter
Posted: Wed Jun 20, 2007 2:30 pm
by ronnieboy58
Is it possible that we can get the schematic of the AM max II board.
I am interesting how will work the PLL on the board and how it makes the freq.
ronald.
Posted: Wed Jun 20, 2007 7:22 pm
by pcs
Nope, sorry.
Let me spell this out again for you, it is NOT possible to change frequency band
just by changing some software parameters.
The driver, filters and output stage are different for various models.
Posted: Thu Jun 21, 2007 10:22 am
by ronnieboy58
Ok,
that is clear for me,but the version AMMAXII HAM 40m-80m have the range between 3.6 and 7,1mhz.
Is it then not possible for my type transmitter with the range 6-7mhz to change it between 3.6 and 7.1mhz.
Is it possible too buy only the 89c2051 IC with this version software between the
40m-80m
band?
greetings ronald.
Posted: Thu Jun 21, 2007 8:51 pm
by pcs
Its better to wait for AM MAX 3 and perhaps get that one
The price of such modification would exceed reasonable amount and would
probably buy you 50% of the new am max3 unit
Marko
Posted: Tue Jun 26, 2007 8:55 am
by ronnieboy58
Any idee when this new AM MAX 3 version will come out then.
ronald.