PCS-Electronics

Contact us via email for a copy.

Most users are more than happy with the way PCI MAX performs, but with some PC configurations I guess it can be a problem. There's a huge difference between different power supplies and even CD-ROM's (making lots of noise usually). We are about to release PCI MAX Ultra, which should deal with the pr...

The only meaningfull information from these codes is the first value,
VCO OK. If this is OK than all is OK and you can sleep peacefully.

As you can probably see, we updated the website and are now running PHP! If you have any ideas for improvement, we are here and listening.

No, HAM antennas are not usable, at least
not the one for 145MHz.

What you should do is check the guides on
the left side menue. Did you see those?
There is one specifically for antennas,
with a very simple GP antenna.

Yes, of course.

Check the wire that connects the
stereo encoder and the MAX RF board.

There might be a short somewhere.

Also check whether the power supply
wire is going to the stereo encored.

I'll contact you via email later and
see what we can do to avoid shipping back,
this is probably a very simple problem.

Hi! As far as noise is concerned: Many have reported great improvement as soon as they moved antenna far from the PC (make sure you feed it with coaxial cable). I'm not sure how important SWR is in that respect. Another thing is the sound card. There are sometimes high-level (speaker drivers) and lo...

New version will have mono/stereo software controllable switch and a connector for RDS

You should roll-off audio after 15KHz, this is what a good stereo encoder does anyway. If audio gets mixed up with the 19KHz stereo pilot, you get distortion and flickering stereo led. Additionaly, this program, called MBL4, helps you setup your audio really beautifully. It has a compressor, precisi...

Its been fixed with the latest version which has been out for a while now!

Check the guides (see menu bar), they explain pretty much everything.

Also check the FAQ...

This is the link to the old version:

http://www.pcs-electronics.com/software ... up_old.exe

Maximum, which is 5-7W

Send me the photo of your card,
and I'll send you a picture with
mods needed to accomplish this.

I am looking into this,
it happens on some computers only.

Obviously one file from this package
(fm2paste) doesn't get installed properly.

Hey, I said via email

I just sent it to someone who asked
for it, was it you (under another email?)

There is a jumper close to the audio
connector. If this is installed, it
is in the high power mode.