PCS-Electronics

To everyone who wants airmail shipping please follow this procedure: 1. Place order for items that you want to purchase 2. Set payment type to proforma and finalize the order 3. Once you receive confirmation e-mail DO NOT make payment yet. 4. E-mail me order number (just reply to order confirmation)...

E-mail me and I'l email you instructions. Just reply to any email you got to us.

Our government has decided to enforce fiscal cash registers for cash transactions. In their infinite and unquestionable wisdom they declared credit cards to be cash as well (go figure). For the time being we suspended accepting credit cards directly but you can pay with credit card through paypal as...

Yes, our products also work under Windows 10, confirmed.

The control program is the same, you only need to install new USB driver for Windows 10.

I will test one of the boards here as soon as I have some free time.

All our products now support Windows 10!

Hello Eric, if the signal is "too wide", as you say (by the way how are you measuring this) the proper way to address this would be to reduce audio level at the exciter (MPX input) and possibly increase stereo pilot a bit if needed. SE6000 series is definitely better than the 2000 and 5000...

I am sorry but we decided to disable airmail again. We asked people to use it with bank transfer only, but 90% just ignored this request. So anyone who is insisting on low-cost regular/airmail shipping, which is not insured nor trackable, can ask for it via e-mail. Be prepared to pay via bank-tranfer.

Old versions did not have read ability, it is probably write only.

Hi, you will need to wire the: +5V GND MPX out (near trimmer P1) RS232/TTL goes to J14, it goes like this: 1 GND 2 RX 3 TX 4 +5V (probably you won't connec this as USB/TTL is powered from USB) 5 +5V (probably you won't connec this as USB/TTL is powered from USB) optional 19KHz square TTL from stereo...

How is MAXPRO2015+ V3 better than the previous version MAXPRO2015+ V1? - On-board RCA connector for those who prefer the convenience of on-board connector - Greatly improved audio frequency response 10Hz-60KHz with variation well under 1dB - Now fully compatible with all MAXPRO6000 LCD displays incl...

Hello James, you can leave a message on our chat system, the icon is in top right of the website. These messages go into our e-mail inbox and we reply them like regular e-mail. Response time is typically from 5 minutes to 1 hour. Make sure you enter your e-mail correctly. Contact us page here: http:...

Hello everyone, now that 50xx series has been fully replaced with the new 60xx and 2015 (yes 2015 and 60xx are all based on new architecture) with only a few 5050 boards left so I believe it is time to escort the 50xx series to the annals of history. As much as 50xx series improved upon the 3000 ser...

http://www.pcs-electronics.com/images/products/links/STL_receiverV1_b.jpg Check it out here: http://www.pcs-electronics.com/stlmax-vhfuhf-modules-p-2529.html Main features: - Covers frequencies from 45-900MHz (specify 10MHz segment at the time of ordering, at the moment transmitters don't cover thi...

It is very difficult to understand you, automatic google translation?

This is what our customer Andy recently e-mailed regarding this antenna: http://www.pcs-electronics.com/power-logperiodic-high-gain-pcs0205-p-321.html It sounded so good I just had to publish it: Hello, I just thought you may be interested to know how the PCS 0205 antenna works I currently have one ...

Signed USB driver (use only when Windows asks for signed drivers and does not let you pass):
http://www.pcs-electronics.com/software ... 102USB.zip

This one will appear under different name (Pololu) as ours (PCS Electronics), but is fully functional and works perfectly.

MAX PRO 6000 series FM exciters Well, it is finally here: http://www.pcs-electronics.com/6000-with-qsoniciii-p-2434.html and here is the manual: http://www.pcs-electronics.com/software/manual_maxpro6015_6050V1_en.pdf Here's a program to control this unit remotely with a PC (RS232 or USB): http://www...

http://www.pcs-electronics.com/max-pro-3000-p-1317.html

USB IO board+

Connect this to your LCD display and you'll have PC remote control.

You can't connect LCD to RS232 or USB directly with just some wires, interface is needed (IC + some resistors and capacitors + connectors)

Updated software/driver again today. A program was complaining about missing library on some computers, that has been fixed.