PCS-Electronics

what should the operating level on the compressor be +4dBu or -10dBV?

I'm getting the output audio from a soundcard, connected to the compressor which then connects its output to the transmitter.

Thanks

Andre`

Here in Malta we will soon see the new Digital Radio Revolution which will in time phase out Analogue FM Transmissions (A mayor concern for us Analogue FM operators). The standard adopted here will be the T-DAB network structure. Is anyone aware of what equipment would such a system entail in terms ...

I would reccomand a Creative Sound Blaster Live! 24-Bit. Were using this on all PC's in the studios. Excellent sound, no hum and great performance.

If you are operating through a good sound proof sudio I suggest the CAD GXL2200 mics which are excellent for high quality braudcasting and they come at very affordable price for their performance. This mic is not directional though. If you have a noisy environment and you need a more directional MIC...

Yes it's the 'old' Limbo I.

I have this problem with the Limbo Compressor/Limier. Whenever there is a segment of silence or music volume fading down (due to end of track) an annoying distorted sound starts to become audible first very low and then slowly fades in to full volume. (During long silent or low volume segments). Is ...

Ok this may sound a bit of a stupid question .. here it goes.

If i have a power amp and the transmitter... and I leave the power amp off and I switch on the transmitter.. what will happen?

Cheers

Thanks for your fine comments radoboy (and for your tribute to Central FM) ;). Let me also take this opportunity to thank radioboy for all the support durng the past years. Without your help I am sure that the station would have never materialised. I would also like to comment about the radio shows ...

Do you think there is any helth risk involved if one sets up a radio station in his home with the antenna about 8 meters high on the roof?

Thanks

Can someone help me out to make this 1Watt ATTENUATOR? Would be very grateful.

Regards

Is it possible to order the atenuator separately?

thanks

Is there any way to limit the output power the old Cyber Max LCD to a maximum of 1Watt?

I was thinking of mooving the station frequency to the lower part of the FM Band, slomething like 87.8FM. For some reason there are few stations in the lower parts of the FM Band. DO you know what could be the reason? is there any problem related to transmitting on such a frequency?

Thanks

So the 2 antennas cannot be mounted on the same pole I presume because they will be too much near each other. How do you make sure that both antennas are in phase with each other?

Do you think that a 5/8 wave FM omnidirectional antenna will work better than the idea i proposed here?

Thanks

Is it possible to use 2 Directional log-periodic wideband antennas and use a splitter to feed both antennas from one transmitter? ---/---/--/---/-- ||-----/--/---/---/-- This way you can get 6db gain in all directions. Also when you split the cable and say you have 6 watts from the transmitter, does...

Do I need to buy a power supply for the 15Watt amp? or does it have a built in power supply?

Regards

I have Cyber MAx LCD. I would like to know If i can use the 15Watt Booster with it. What exactly is an attenuator and does it come with the unit?

Also, do i need to buy a power supply for the 15Watt Booster or i just hook it to the electric supply?

Thanks

ok 10x

I would like to make a setup using my Cyber Max LCD and 15W MAX BOOSTER.
What do you think? is this possible?

Thanks and Regards

A

Which way i should turn the trimmer of MAX PRO I - 7W to increase the power? Clockwise or Antyclockwise?

Regards