PCS-Electronics

But if you need any specifics regarding protocol email me directly, I will be glad to help out. The protocol should be obvious from the posted sources though. I tried to contact you via "contact us" on your HP (obviously unsuccessful) - as you are admin you can probably as easy pm me, can...

pcs wrote:Why don't you check the manual? Do you need this for linux?
Even if power is set to zero there might be very low signal present, enough to be heard 5-6 meters far.

I need this for linux, yes. The PC is powered on permanently, but I like to be able to switch off the transmission, if possible.

to the mods, please remove this thread, I accidentally posted to the manual section.

Hi, is there a command to turn off the pcimax 3000 v2, i.e. into the default state after power on (by the way what is the default state)? When using the github pcimaxctl tool, setting the output power to 0% (F0 command) does not turn off the transmitter. Also, the source code comments notes valid ra...

For the sake of completeness, the (generic) usb audio device will be recognized by recent distributions.

Cool, I will give that a try although I really do like the provided antenna.

that sounds about perfect, thanks!

Hi I bought the 3000+ 1W V2 transmitter for home broadcast, which turns out to be a bit of overkill. Is there a simple way to reduce the max. output power of my PCImax (besides buying the 100mW version)? I am already considering a pi-filter at the antenna output but reading a similar topic for the 2...

Hi, I have set up my PCImax via the usb serial terminal successfully, but for the sake of simplicity in my hardware setup I was wondering whether I can directly connect to the RDS RS232 pins or use the soldering iron to bypass the usb<->rs232 module. The background beeing that I want to control the ...