PCS-Electronics

Sorry!! My board is SE 5000 DSP

Brent

Could you please send instruction to me.

Thanks,
Brent

Sorry for the error it is 1,2,4,8 Mine is set at 4.

Hello PSC, I have your CYBER MAX FM+ 300W with MAXPRO 5015+ inside. My question is what is the correct MAXPRO 5015+ jumper setting for this amp? I have 1,2,6,8. it is currently set at 6, would it be safe to try 8? The reason I'm asking is my amp with a perfect 1 to 1 SWR will only output 200Watts at...

After extensive research I found a comment about Microsoft office and the error mentioned. If you install Microsoft office the error goes away and your software works perfectly. This work around is acceptable to me and I am now happy. Thanks for the direction in your earlier post. You also might che...

The fix for windows XP does not work. As for windows 7 64bit you cannot write to the SYSWOW64 directory, therefore no downgrade is possible. The ver. of the file is set during windows installation and as far as I know you cannot change this in windows 7 64bit. I have your software running on a lapto...

Same Error

System Error &H8007007E (-2147024770). The specified module could not be found.

regsvr32.exe msvbvm60.dll comes up with. The module "msvbvm60.dll" may not compatible with the version of windows your running. Check if the module is compatible with an x86 (32-bit) or x64 (64-bit) version of regsvr32.exe. After that my options are to select (OK) to close the warning wind...

Also located in C:\Program Files (x86)\CyberMaxFM\BACKUP

The file is located in C:\Windows\SysWOW64

Again Used Dependency Walker it comes up with.

MSVBVM60.DLL Error: At least one required implicit or forwarded dependency was not found.

Brent

Used Dependency Walker it comes up with.

MSVBVM60.DLL Error: At least one required implicit or forwarded dependency was not found.

Windows 7 64 pro.

Same error.

Brent

This time the installation stopped at a HTML Help page. After closing down this screen the installation completed. Same Error message when you try and run the program. System Error &H8007007E (-2147024770). The specified module could not be found. Please look into this when you get a chance. For...

Has anyone got the dreaded Error. System Error &H8007007E (-2147024770). The specified module could not be found. PCS sad it is a missing windows file problem. They also say that it runs under windows7 64bit without a problem on there side. I believe them, I have a machine working on my side. (W...

My mini RDS board came with only black wire does this go to GND or RX on the RS232 connector on PCI MAX 3000+ PC card . Also note no connector end on the wire to plug in to card, I will solder this to appropriate pin. Any Help would be appreciated.