PCS-Electronics

Thank you Marko for the information. I appear to have everything now, made a USB to TTL data cable. Q. I don't see any read command to read from the RDS4000+ Micro, so I cannot check the data write went through okay? Appears it's only a write to setup? I will not be able to tell until I take the uni...

G'Day, I have a RDS4000+ Micro that was attached to my SE5000 DSP. Due to an electrical short that toasted the TX board the RDS and Stereo encoder has been sitting around for some time now. The school that had the FM transmitter have purchased another TX module from a different company, locally base...

Thanks Marko.
Just now to wait for the new board to turn up.

Just another quick question while I might have your attention. I see you sell a Network card, can this be fitted to the setup I have, currently it only has USB and RS-232, the network feature would allow me to access remotely. Cheers.

Marko, Thanks for your recent help, and questions to the possible reason why my RF Final died. I have been thinking about this, and I thought about using 1 or 2 filters in line with the transmitting signal. I had these from a repeater being pulled down and I put them aside to be modified for a duple...

Marko, Quite possible this could of been due to a storm, we had one go past during the day, but was a fair way away. But I know what you mean. I have sent you an email directly in response so will see what your reply is. I am thinking of getting the 5040, as this will give the school options for lat...

Hi All, I am in need of advice. My unit decided to blow the fuse while operating at our local primary school. It was running into a tuned antenna, which I had only checked before connecting it. Via a Bird with a 100Mhz slug. Had been running of a few days before this happened. I changed the fuse and...

Hi All, I am the proud owner of a new CyberMax+ FM Transmitter fitted with SE5000 DSP and RDS4000+. After much searching throughout the net I decided on the purchase of this unit. There were plenty to choose from, more then I thought would be. First impressions on opening the box was a nice 1U shiny...

Hi All, I just received a nice new CyberMax+ Series Unit. First impressions "VERY GOOD" I purchased with the RDS4000+ install. I am slowly working through the whole unit, but have a couple of questions that I can't work out. 1. I have installed the RDSMAX 4000+ software, I checked the comp...