PCS-Electronics

Hello, long since last time I was here. I thought we could continue this thread, tell about your studio and equipment you use. I have the same as listed in the first post, but i have upgraded to a 150W amp. And use Limbo 1 Compressor and SE5000 DSP stereo encoder with RDS. I have upload a sound exam...

I have a little fun things and tell and with this end the conversation.

I disconnected all the equipment and connected it up again, so does everything perfect again as it was before.
Transmit now with 125W perfect stereo and RDS

I think the most popular broadcasting metode is FM

You need a license for broadcasting on the FM band

But I think it would be okay, if you do not disturb others.

I doubt it, it will ann on which country you live.

But as long as you act nicely on the air and not destroy the other stations, there is often good.

It depends on how high you have your antenna, and if you have other nearby channels to your frequency.

But 5 miles should be no problem with 15 watt transmitter, and a clear view to your listeners.

Well, 200 dollars are little too low, for 5 miles range you need: 15 watt transmitter. Antenna (outdoor) Power supply Coaxial cable ( 50 ohm) Here are some examples of 15 transmitters: http://www.pcs-electronics.com/cybermaxfm-transmitter-p-216.html http://www.pcs-electronics.com/3000-next-generatio...

It's been almost a year since I wrote this and I have upgraded my radio station with an amplifier, stereo sound and RDS feature. All of it purchased from PCS Electronics. I have comments from listeners that the sound on my radio is much better than any of the other local stations here in my area. Pe...

Yes.

No, I don't think that's the problem, the noise are still there when im 3km away from where the transmitter are located...

The ''stereo noise'' stop when I turn down the FM amp.

The amplifier and stereoencoder are located in different places.

Also when the rds encoder is disconected the noise still are there. maybe it is the new amp who disturb. Im gonna check it out when im back from work.

No, when I take out the RDS board it is still there.

Power from transmitter?
I have 40 watt before now I have 100 watt

I have record from the reciver, you can hear here so you understand what I mean, it's a little difficult for me and explain in English.

Link to soundfile: http://www.dump.no/files/0f70b7a9230b/noise_record.mp3

Hi,
I have a SE5000 DSP+ stereo encoder
Suddenly, I have been noise in the background, it is only when I have stereo signal, when I put over to mono, it is gone,
What is the problem?

It has worked perfectly before,

Thanks.

It don't work with SAM Broadcaster, but I found another solution so now it display Song title & Artist on the display

Very cool function

;) To all others: No doubt with and buy from PCS, they know how to build high quality products and customer service really takes seriously. All I have purchased from the PCS impresses me really. What has surprisingly me most was the SE5000 DSP and the RDS daughter board! Real top quality of the soun...

What is the name on the plug in who pick up song title and artist from winamp?
I read it some place but I can't find it now..

Max Pro 3 yes, but I fix it

Now, I take pleasure in stereo and RDS

I get my package today

Nice job again Marko!! The sound is amazing good, and RDS was verry easy to set up

The only thing I wonder is how I can get the sound higher?

It is about half of the other stations.