PCS-Electronics

Thanks Mark,

I have tried this, can you give me a hint as to what the Threshold setting should be. The guide said around -12 but the lowest setting I can get is -18?

John

Hi Mark,

More help needed!

The transmitter is going well however it is very easy to overdrive it which causes the output to distort. Is there an easy way to turn back the gain so that it can prevent the distortion caused by sending too much input signal to the transmitter?

John

I have to make up a lead for the com port connection between the PC and the Transmiter. Can you let me know the pins used so I can wire it correctly please?

Are there any instructions on the RDS MAX 3.0 software? I want to switch between automating song title and the name of the station and can't work out what I need to do. Ideally I would like to set it to display 2 scrolls of the song name followed by a static display of the station name for say 30 se...

Thanks Mark your solution has worked fine!

John

Hi, Jusr recently purchased the Max III 15w Transmitter with RDS. It runs from RDS Max V3.0. My issue is that the computer needed to run the software has 2 coms ports 8 and 9. The software needs comms ports 1 to 4. Is there any way I can alter to have comms ports 8 or 9 included in the list of avail...

Thanks for the quick response.

Tried it on full power and received an error 12c?

SWR has gone out to 1.5 relected and 12 forward? Is it ok to run it with the error?

John

Hi Mark,

The unit I purchased is a CyberMAXFM 15W DSP 2H rack with internal power?

Would this still create this issue?

John

Hi, I recently purchased the above. It replaced a 500MW transmitter. Currently have it set to 35% RF and have found the quality to be really poor. Have set all areas to the recomended defaults but still distance is limited to 500 yards from the antenna and then get significant distortion. SWR is sho...