PCS-Electronics

Now to find a spare $800.

Something that I do not know if it is even possible to do. Could you have the music levels hitting the transmitter somewhere on the GUI interface. Even if you just put an over light for left and right would be helpful. I suspect that I might be over modulating and back down on the volume of I tunes ...

Found the answer in the book. No I do not. I do not have to make any of these settings.

Being in the US what setting should I have the country and country -ECC at ?

On the display on the cybermax Micro v4 the output power says 5.1 W but, the card is suppose to only be a 3W card. How is this possible?

OK thank you

Rebooted the machine today. When it came back up everything was still there in the device manager. When I opened the CyberMaxMicro it opened fine. The only difference was it would not show any power. Always 0.0Watts. When I looked at a tuner with a power meter it only went up half way, versus full a...

Now for some reason when I booted the machine back up this evening for a neighborhood campfire, the com port listing and the usb listing are gone in the device manager. Of course the system is not working. I loaded up the program. When I try to install the usb drivers I only get one warning instead ...

I replaced the outflow fan from a 80mm to a 92 mm. That gives me a much higher cfm. Also found a fan that attaches to the motherboard on one of the motherboard anchor screws and has a flex neck so I can have it blow right across the card. That should keep things cool. Thank you for the help enjoying...

COM 3. That is what I set it to in CyberMaxMicro. Now it works. I swear I had it set that way before I wrote you. Oh, what is the "normal" operating temp? What is the alram set to go off at?

I am using the PCI Max 3000. I am installed software CyberMaxMico v4. I also installed the USB 2 virtual com port software dated July 2012. I changed the COM port to COM 3 as that is what is listed in the device manager. So now it is working. If I turn on auto update, it says the com port does not e...

Was not complaining at all. I was just curious.

I finally got the fans to keep the unit cool and attached the unit to the antenna in the attic. Now CyberMax Micro v4.0 is saying I am outputting 4.1 watts at 90%. What is happening?

At what temp does the card temp protection activate? Just curious. I have been with you for several pci cards. I think back to November of 2004 was my first PCIMax card but, my history on the site only goes back to 2006 and this one is so clear and the range is great. I think you have mastered the p...

It has been a month since your first post about this product. How are things going on getting it to retail sale?

The power supply is only putting out .77amp. I know that is below the 1amp desired. It is enough to cause the problem?

I have used this power cord, that I purchased through you, to run another cybermax micro before with no problem. When it boots up it looks fine. Then when it starts to broadcast the lcd read out wash out. Like if you change the contrast all the way down. Then the unit reboots but, you can't even rea...

When I hit the contact link on your main page I get
Parse error: syntax error, unexpected ';' in /usr/www/users/engslo/pcselectronics/information_contact_us.php on line 214

I fired my new cybermax micro and the unit's LCD does not stay a bright green and soon the unit shuts down and reboots. Help!

I tried to send to customer support but the link did not work.

I don't know where to put this so, this seems the best place. I have a pcimax 2006 and the new 15 watt power booster. I am using the dipole antenna that PCS uses. When I increase the power on the booster the SWR lights start to come on. I notice that they dance with the music. Is the level coming in...