6000W 3-way FM band PTFE splitter/combiner set

 6,99 1.199,99

In Stock
SKU: No resdistors Categoría:
 1.199,99

Hay existencias

 599,99

Hay existencias

 99,99

Hay existencias

 599,99

Hay existencias

 659,99

Hay existencias

 7,49

Hay existencias

 6,99

Hay existencias

 8,99

Hay existencias

Los precios mostrados son sin IVA (pagado solo en la UE)

Descripción

6KW (6000W) 3-way pallet amplifier combiner

Make your own 6000W amplifier or transmitter with these heavy-duty 3-way combiners. Assembled and tested, ready to be installed. Heavy duty design, large and sturdy. You will need one input board, one output board and 3 identical amplifier modules of any rating from 0 to 2000W. Output combiner must be bolted to a heatsink with some airflow for cooling, input combiner can be bolted directly to an aluminum enclosure as it does not heat-up much. Surface mount construction makes installation easy.

Technical specifications output combiner:
– 86 – 110MHz
- Impedancia: 50 ohmios
– Max power per module: 2000W
- Potencia de salida máxima combinada: 6000W
– PCB de PTFE de pérdida ultrabaja; constante dieléctrica estrictamente controlada.
– Specifically designed for combining several RF amplifiers.
–  0.1 dB maximum power loss.
– PCB measures: 371 mm x 126.5 mm x 18 mm tall (when matching inductors are installed.)
Complete with 1/4 inch aluminum spreader plate, 50 ohm 800W resistors, matching inductors and tuning.
– PCB is Teflon 0.125 inch thick with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
– Input return loss better than -25dB 87.5 to 108.1MHz (when  matching inductors are used)
– Output return loss better than -23dB 87.5 to 108.1MHz.

 

Technical specifications input combiner:
– 86 – 110MHz
- Impedancia: 50 ohmios
– Max power per module: ~15W
– Max combined input power: ~40W
– Specifically designed for combining several RF amplifiers.
– Size: 226.3 mm x 64.8 mm x 3.2 mm
– Common port return loss: better than -20dB
– Outputs return loss: better than -25dB
– Unbalance: 1 degree max

Nota: Utilice PTFE coaxial / semirrígido para realizar las conexiones, los cables adecuados son aquí.  Cable semi-flexible hand-bendable 50ohm de 0.250 pulgadas encaja bien.

Importante: Mantenga los cables muy cortos, ¡cada milímetro cuenta! Cualquier cableado desde las tarimas hasta los combinadores debe ser simétrico (cable coaxial de igual longitud).

 

Información adicional

Valoraciones

No hay valoraciones aún.

Solo los usuarios registrados que hayan comprado este producto pueden hacer una valoración.