6000W 3-way FM band PTFE splitter/combiner set

7,60$1.304,28$

In Stock
Artikelnummer: No resdistors Kategorie:
1.304,28$

Vorrätig

652,14$

Vorrätig

108,68$

Vorrätig

652,14$

Vorrätig

717,35$

Vorrätig

8,14$

Vorrätig

7,60$

Vorrätig

9,77$

Vorrätig

Die angezeigten Preise sind ohne Mehrwertsteuer (nur in der EU bezahlt)

Beschreibung

6KW (6000W) 3-way pallet amplifier combiner

Make your own 6000W amplifier or transmitter with these heavy-duty 3-way combiners. Assembled and tested, ready to be installed. Heavy duty design, large and sturdy. You will need one input board, one output board and 3 identical amplifier modules of any rating from 0 to 2000W. Output combiner must be bolted to a heatsink with some airflow for cooling, input combiner can be bolted directly to an aluminum enclosure as it does not heat-up much. Surface mount construction makes installation easy.

Technical specifications output combiner:
– 86 – 110MHz
– Impedanz: 50 Ohm
– Max power per module: 2000W
– Maximale kombinierte Ausgangsleistung: 6000 W
– Extrem verlustarme PTFE-Leiterplatte; streng kontrollierte Dielektrizitätskonstante.
– Specifically designed for combining several RF amplifiers.
–  0.1 dB maximum power loss.
– PCB measures: 371 mm x 126.5 mm x 18 mm tall (when matching inductors are installed.)
Complete with 1/4 inch aluminum spreader plate, 50 ohm 800W resistors, matching inductors and tuning.
– PCB is Teflon 0.125 inch thick with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
– Input return loss better than -25dB 87.5 to 108.1MHz (when  matching inductors are used)
– Output return loss better than -23dB 87.5 to 108.1MHz.

 

Technical specifications input combiner:
– 86 – 110MHz
– Impedanz: 50 Ohm
– Max power per module: ~15W
– Max combined input power: ~40W
– Specifically designed for combining several RF amplifiers.
– Size: 226.3 mm x 64.8 mm x 3.2 mm
– Common port return loss: better than -20dB
– Outputs return loss: better than -25dB
– Unbalance: 1 degree max

Notiz: Verwenden Sie PTFE-Koax/halbstarr, um Verbindungen herzustellen, geeignete Kabel sind Hier.  0,250 Zoll halbflexibles Hand-bendable 50-Ohm-Kabel ist eine gute Passform.

Wichtig: Halten Sie die Leitungen sehr kurz, jeder Millimeter zählt! Jegliche Verkabelung von Paletten zu Combinern muss symmetrisch sein (Koaxialkabel gleicher Länge).

 

Zusätzliche Informationen

Bewertungen

Es gibt noch keine Bewertungen.

Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Bewertung abgeben.