CYBERMAXFM+ BE+ 1W 5W 15W 25W 50W and 100W

Beskrivelse

Black edition with new high performance advanced display, backed by 5 years of warranty

The new Black Edition (BE+) series FM exciter brings completely new advanced graphics display with many new features such as web control interface, ethernet connectivity, two-color VU meter, smooth rotary button operation and full control over every aspect including RDS. Sharp low pass filter, great stereo separation, fantastic reliability and tight MPX control with several limiters were carried over from the previous models. With this new OLED display and new great looking enclosures with improved ventilation it seemed completely logical that warranty period would be extended to 5 years **.

This unit is perfect for demanding broadcasters. No tuning is necessary, design is entirely wideband. All you have to do is set the frequency and output power, the rest is optional. SWR, temperature and polarity protection make it difficult to destroy the unit. Unit is housed in a brand-new 1H professional 19″ rack, new design is lighter and RF tight (does not leak RF). It is rugged and made for 24/7/365 operation. Each unit has a wide-angle high contrast OLED display.

Those who use streaming sources to stream your audio will be happy to hear that as an option we also offer industry – standard streaming service receiver which also reads MP3 files from USB port at the back. What is even cooler is that the name of the stream or song name (if transmitted by stream operators) will be displayed on the display and also sent out with RDS. Instructions how to set this up are in the manual for the LCD display.

 

What’s new in BE version:
– Bright 122×32 graphical LCD with rotary encoder, USB and Ethernet ports.
– Classical two-color LED-based VU-meter and forward/reflected power indicator.
– Remote control via Ethernet and web browser as standard, possible even from mobile phone
– RDS fully configurable via OLED display and web interface
– RDS is also supported via industry-standard UECP interface
– RDS can now substitute special national characters by standard recognizable by all receivers (if desired)
– RBDS and RDS are both supported
– Time update via Internet to always ensure precise CT RDS time with very precise implementation of CT algorithm. With automatic daylight savings switching.
– Firmware of all sub-systems can be upgraded via USB interface. If we release an update or a new feature you will be able to install it.
– Optional streaming and Mp3 playback which can also transmit song name via RDS
– Calibrated two-color VU meters for power, reflected power and audio level
– Forbedret MPX-niveaukontrol (begrænsning indført på flere punkter).
– MPX level adjustable from outside via a hole next to XLR connectors at the back
– 100 effektjusteringstrin
– Procentbaseret effektjustering (50% vil nu give cirka halvdelen af udgangseffekten, V2 kunne give et meget omtrentligt resultat)
– USB digital audio input (MPX mode now features 192KHz conversion rate)
– Optional AES/EBU in MPX audio input models (later it will also be available in stereo models)
– Modulær konstruktion, de fleste moduler kan nemt udskiftes uden lodning
– Easy change of frequency or any parameters via display or web interface, friendly user interface
– Omkostningseffektiv, energieffektiv, let, lille og praktisk
– 1W and 5W versions do not have any fan and are completely silent, 50W and 100W version have much better cooling than previous versions

Hvilke parametre kan jeg ændre via fjernbetjeningen?
Frequency, output power, various alarms, network parameters, time settings, audio input selection and levels, DSP parameter and RDS settings can be changed via Ethernet in web browser. No software installation is needed, just connect your transmitter to local Ethernet and open web browser to access all the settings. Check the manual for more info. Below is a small sample of the interface.

Hvordan forbinder jeg senderen, antennen og lydkilderne?
Se på billedet nedenfor (klik for at forstørre) for et eksempel på en god radiostation med nogle studieartikler. Nederst på denne side se efter links til andre elementer, som du kan bruge til at konfigurere din radiostation (HVAD SKAL JEG ANDET BRUGE, OG DET VAR IKKE MED? og HVAD KAN JEG BRUGE SOM LYDKILDE?).

Tekniske specifikationer:
RF AFSNIT
– Output power: 1W to 100W depending on the model, easily adjustable via LCD display (100 steps)
– Udgangsimpedans 50 ubalanceret, VSWR mindre end 2:1 for fuld udgang
– Udgangsstik: BNC hun
– Frekvensområde 87,5 til 108MHz
– PLL step 50KHz
– RF Spurious > -85 dBc @ +- 1MHz min. ude af transportør
– RF Harmonics > -60 dBc min, -70dBc type
– Overvågningslysdiode: Tænd, SWR/TEMP/PLL-advarsel
– Modulationsevne: FM
– RDS support: Yes
– RDS CT accuracy: -+0,1 seconds
– Supported RDS groups: PS, RT, CT, AF, EON, PTY, TA, TP, ECC, DI bits, UECP interface

AUDIOSektion
– Lydstik: BNC (MPX-indgang), RCA, XLR og USB
– 192KHz USB-lydindgang til MPX-version
– Påkrævet lydniveau: 4dBu (1,23 Vrms @ 0db gain), -10dBu (0,316 Vrms @ +14dB gain), justerbar i et bredt område
– Lydindgangsimpedans: 10 Kohms resistiv, afbalanceret
– Pre-emphasis Flat, 50 eller 75usec
– Harmonisk forvrængning (THD) <0,1%
– Stereoadskillelse: >65dB
– Mode: Stereo/Mono, justerbar via LCD-skærm eller eksternt med pc
– Frekvensamplitude: 0,5dB, 30Hz – 15kHz

GENEREL
– Omgivelsestemperatur: -5° til +45°C
– Power supply: 15V(ordered separately, current rating depending on power)
– Standard 19″1HE rack, 125 mm dybt (ca. 5″)
– Vægt omkring 4 kg (volumetrisk)

Note: BE units are available in 2 versions.
– Med MPX-indgang (f.eks. fra STL-modtager eller ekstern DSP-processor)
– Stereo DSP/RDS version med DSP stereo encoder plus RDS

Modelnavn	DSP processor	RDS processor	XLR input	Fuldt enhedsnavn
BE MPX	Ingen	Ingen	Ja	CyberMAXFM+ BE+ MONO MPX 192KHz USB
BE STEREO + RDS	Ja	Ja	Ja	CyberMaxFM+ BE STEREO DSP+RDS

Hvad er inkluderet?
– Sender
– USB-kabel
– Short Ethernet cable
– Mains power supply and mains cable must be ordered separately (they are listed below transmitters, get the one for your power level)! The reason is that these units can be battery powered (car battery for example), they are relatively common standard items and many have them already. Mains cables are standard desktop PC type and vary from country to country so we don’t know what type is used where you live (and sometimes in the end the unit ends up somewhere else, not where we ship it). Also, these are industry standard.

Hvor stor rækkevidde kan jeg forvente?
Du kan læse mere om rækkevidde i denne guide HER.

Hvad er RDS?
Radio Data System, basically it displays station name and sometimes song name and similar information on a compatible radio receiver. Very popular in Europe
and also in the US.

IP audio streaming with MP3 playout from USB
This add-on card lets you receive internet audio streams or play MP3 files from USB drive. This is basically industry-standard Barix IP module inside your transmitter. Especially cool is that the stream source often also transmits song name and when this is the case the RDS encoder can also transmit song name and it can be displayed on the LCD. Read the manual to see how this is done.

HVAD KAN JEG BRUGE SOM LYDKILDE?
– En højkvalitets mixer med telefonhybrider, som f.eks denne meget populære enhed.
– Professional broadcasting microphone with noise-free stand
– Your PC. Just plug audio cable into your sound card. With some audio scheduling software.
– CD-afspiller, MP3-afspiller eller ethvert andet musikgengivelsessystem

HVAD SKAL JEG ANDET BRUGE, OG DET VAR IKKE MED?
– Kræver netstik, som kan købes i dit land (hvert land har et andet netstik, og vi fører ikke alle). Dette er et standard netstik, og prisen er typisk omkring 1 US$ eller mindre. Du kan få det i enhver electronics butik, såsom radio shack, circuit city, enhver computer butik osv. Brug altid jordet stik for din sikkerhed!
– Du skal også bruge antenne, du kan bestille en HER
– Du vil også koaksialkabel til at forbinde antenne og sender, du kan bestille det HER (op til 20m) eller HER (20-60m) eller HER (>60m).
– Radio Essentials Kit indeholder forskellige stik og adaptere plus en antenneanalysator, alle stationer bør have disse ved hånden til enhver tid.
– Du skal bruge lydkilde (mixer, cd-afspiller, mikrofon osv.). Det er en god idé at bruge pc som lydkilde og køre en form for lydplanlægningssoftware, såsom Jazler, Raduga eller winamp. Winamp-plugins såsom rocksteady findes og kan gøre din lyd endnu bedre.

Hvor kan jeg købe alt, hvad jeg skal bruge for at starte i en pakke, inklusive antenne og alt muligt andet?
Du kan tjekke vores Alt inklusive senderpakker, disse inkluderer antenne, koaksialkabel og strømforsyning. En anden måde at gå ville være at vælge din foretrukne antenne her og koaksialkabel med stik here, this way you can configure your own package. Antenna accessories such an antenna analyzers are also very welcome. And of course lightning protection.

**For the warranty period of 5 years some conditions apply. Warranty does not cover final transistors and shipping cost, also natural disasters and mishandling are excluded.