PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Slovensko    
  Na vrh » Katalog » Brezžične avdio/video povez » Moj račun  |  Vsebina vozička  |  Na blagajno   
Naši izdelki
FM oddajniki->
AM oddajniki
DAB+ digitalni radio->
Razprodaje
Material za oddajnike->
FM ojačevalniki->
FM radijske antene
TV oddajniki->
PC oddajniki
TV antene
TV ojačevalci->
Brezžične avdio/video povez
Koaksijalni kabel in konektorji
RDS koderji
Stereo koderji
Inštrumenti
Elektronske komponente
Programska oprema
Zanimivosti->
Sončni paneli
Oprema za studio->
DEVA Broadcast->
RF servis in razvoj
Kaj je novega?
H-155 coaxial cable 15m + 2xN connector
H-155 coaxial cable 15m + 2xN connector
43.99EUR
Naši radijski vodiči
Kako začeti
Pogosto zastavljena vprašanja
Kako narediti oddajnik
Koaksialni kabel
Avdio oprema
Sheme
Nove sheme
Čarovniki
Ojačevalci
Antena
Napajalnik
Priporočeno branje
Spajkanje
Pričevanja kupcev
Informacije
O podjetju PCS Elektronik d.o.o.
Pošiljanje in vračilo izdelkov
Naročanje
Podpora
Trenutne zaloge
Pogosto zastavljena vprašanja
Forum
Kontaktirajte nas
Distributerji
Izjava o varnosti in zasebnosti
Program oglaševalcev
Informacije o oglaševanju
FAQ programa oglaševalcev
Prijava oglaševalcev
Kuponi
FAQ za darilne kupone
Informacije o varnosti


PayPal and credit cards accepted!
CyberMaxLink8000+ 10W/20W/200W VHF/UHF STL audio link  


Need to send your audio from studio to the remote transmitter? Now with 1-200W of power and covering also UHF band! CyberMaxLink6000+ VHF/UHF Studio to Transmitter audio link is a MPX Stereo wideband FM audio transport system providing high quality broadcast audio wireless bridge. These systems offer great value and work either in MPX or two-channel stereo mode and offer excellent overall performance.

Main features:
- Synthesized from 45-850MHz (specify 10MHz segment at the time of ordering)
- The transmitted and received frequency can be set by LCD display on front panel (UP/DOWN keys)
- Suitable for MPX systems (stereo encoder in studio) or for 2-channel systems (2 audio channels, left+right, with 19KHz notch filter to prevent beat frequency)
- Built-in speaker for easy monitoring at the receiving side
- Low THD distortion: the THD value with stereo or mono demodulated and deemphasized signals is negligible
- Flat frequency response
- Excellent signal to noise ratio either in mono or in stereo
- High sensitivity and RF immunity
- High adjacent channel rejection
- LCD Display: shows frequency and a number of other parameters (temperature, voltage etc)

Technical specifications for transmitter:
- Synthesized from 45-500MHz (specify 10MHz segment at the time of ordering)
- PLL step: 100KHz
- Modulation: FM, ±75 KHz peak deviation
- Frequency stability: <±200 Hz
- Output power: 10, 20W, 50W or 200W, adjustable from 0 to max via LCD display
- Output impedance: 50 unbalanced, VSWR less than 2:1 for full output
- RF output connector: BNC female (rear panel)
- RF Spurious: >-75 dBc @ +- 1MHz min. away from carrier
- RF Harmonics: > -50-60 dBc Standard
- Monitoring Led: Power on, SWR/TEMP/PLL error
- Audio input connectors: RCA (cinch) and XLR (DSP version)
- Audio level: 1Vpp
- Audio input impedance: 10Kohms
- Pre-emphasis: Flat, 50 or 75usec, adjustable
- Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
- MPX input frequency response: 10 to 100 KHz ± 0.15 dB
- AUX input frequency response: 10 to 100 KHz ± 0.15 dB
- Harmonic distortion (THD): > 0,1% ( 0,05% typ. )
- Channel separation: 40 dB min., 20Hz to 15kHz
- AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
- AUX channel input impedance: 10K
- MPX and AUX input connector: BNC-female
- Power supply: 110-240V 50/60Hz
- Operating temperature range: -15 to 45C
- Dimensions : 483 x 88 x 150 mm , rack std. 19”2U
- Weight: 2Kg


Technical specifications for receiver:
- Available for frequency: 45MHz-850MHz (specify 10MHz segment at the time of ordering)
- Built-in speaker for easy monitoring
- Sensitivity: ~1uV 10dB SINAD (varies with frequency band, falls rapidly above 600-900MHz, can be corrected with preamplifier)
- Frequency response MPX: 20 Hz to 60 KHz ±0.1 dB
- Stereo separation: 20 Hz to 15 KHz >40 dB
- 19KHz notch attenation: > 60 dB
- S/N Ratio : >65 dB @-40 dBm , 75 KHz dev. and 1 KHz mod.
- THD : 20 Hz to 53 KHz <0.3%
- Selectivity: ±160 KHz at -3 dB IF BW, ±500 KHz at -62 dB IF BW
- Image rejection: >65 dB
- Stereo audio output impedance: 50 ohm balanced
- Stereo audio output connector: RCA/CINCH female
- MPX output impedance: 75R
- MPX output connector: BNC female and XLR balanced
- Headphones output: >2x0.2 W stereo at 32 ohms
- Headphones output connector: 3.5mm stereo phone jack
- RF input impedance: 50ohm
- RF input connector: BNC Type - female
- AC power: 85~264VAC; 120~370VDC, full range universal input, can also work from 12-15V DC
- Power consumption: approx 20W from AC
- Operating temperature range: -15 to 50C
- Dimensions : 483 x 44 x 130 mm , rack std. 19”1U
- Weight: 2Kg

What's included:
CyberMaxLink6000+ 10W/20W TX+RX includes receiver and 10W/20W transmitter (1H rack) with mains power supply for both RX and TX. Transmitter is equipped with DSP STEREO ENCODER. You can use this link in either 2 separate channel mode or as a MPX link (in this case set encoder to mono and use MPX IN BNC at the back). RDS encoder is not included by default, you can add it if you wish.
Antenna is not included, you have to select it as it is listed separately below. More antenna types available here.

CyberMaxLink6000+ 50W/200W TX+RX includes receiver and 50W/200W transmitter with built-in universal mains power supply for both RX and TX. You can use this link in either 2 separate channel mode or as a MPX link (in this case set encoder to mono and use MPX IN BNC at the back). RDS encoder is not included by default, you can add it if you wish.
Antenna is not included, you have to select it as it is listed separately below. More antenna types available here.

IMPORTANT:
At the time of ordering please specify 10MHz frequency band, for example 210-220MHz.

To look for an alternative antenna check: here. 
To look for a suitable coaxial cable check: here. 
All our manuals and software are available here.

 

 

Ta izdelek smo dodali na spletno stran Čet 13 Marec, 2015.
 *Izberite količino za vsak izdelek, ki ga želite, in kliknite gumb 'Dodaj v voziček' spodaj.
Prikazujem 1 do 7 (od 7 izdelkov) Strani rezultatov:  1 
    Ime   Model   Izberi   Cena 
CyberMaxLink8000+ 10W TX+RX + PSU  CyberMaxLink8000+ 10W TX+RX + PSU   50-500MHz (specify)  899.99EUR
DDV se doda na koncu
CyberMaxLink8000+ 20W TX+RX + PSU  CyberMaxLink8000+ 20W TX+RX + PSU   50-300MHz (specify)  949.99EUR
DDV se doda na koncu
CyberMaxLink8000+ 50W TX+RX  CyberMaxLink8000+ 50W TX+RX   50-850MHz (specify)  1,799.99EUR
DDV se doda na koncu
CyberMaxLink8000+ 200W TX+RX  CyberMaxLink8000+ 200W TX+RX   50-850MHz (specify)  1,999.99EUR
DDV se doda na koncu
2x 4-element STL Yagi 300-500MHz + 5m coaxial cable  2x 4-element STL Yagi 300-500MHz + 5m coaxial cable   300-500MHz, N con, 8dBi  209.99EUR
DDV se doda na koncu
2x6 element Yagi 400-470MHz + 5m coaxial cable  2x6 element Yagi 400-470MHz + 5m coaxial cable     209.99EUR
DDV se doda na koncu
Add RDS encoder  Add RDS encoder     64.99EUR
DDV se doda na koncu
Prikazujem 1 do 7 (od 7 izdelkov) Strani rezultatov:  1 
Nakupovalni voziček
0 izdelkov
Hitro iskanje
 

Za iskanje uporabite ključne besede.
Obvestila
Obiščite naš forum
Zadnje objave:

Kliknite za prikaz foruma
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce Slovensko
Valute
   

Druge valute

Kontaktirajte nas | O podjetju PCS Elektronik d.o.o. | Podpora | Pogosto zastavljena vprašanja | Kako začeti | Pošiljanje in vračilo izdelkov
Prikaži cene v US$ | Prikaži cene v EUR | Priročniki, programska oprema in podpora

Vse besedilo na tej spletni strani, opisi izdelkov, vodiči in skripte so
last podjetja PCS Elektronik d.o.o.
osCommerce