1W, 5W, 15W and 25W FM TRANSMITTER PACKAGES FOR DRIVE-IN CINEMA AND TRANSLATION!
Can also run off the batteries (12-15V), practical for mobile or solar powered installations
This package is based on our CyberMaxFM+ SE V3 rack mounted FM transmitter series for demanding broadcasters operating in the 87.5 to 108MHz band. It contains our reliable FM transmitter with optional DSP stereo and RDS, an antenna, coaxial cable and all connectors.
A perfect FM transmitter for a regular licensed radio station, drive-in cinema, church, medium size radio station, campus radio or a religious radio. Very suitable for portable or improvized installations and small radio
stations, advertising (housing, shops),
special occasions, drive-in cinema wireless sound distribution, translation,
tourism.... Protected with Temp and SWR protection. It can also serve to drive an amplifier of any power.
Here is a guide to setting up FM transmitter for drive-in cinema.
- Frequency and power fully adjustable via LCD (from zero to max for given model)
- Excellent audio quality and stereo separation (V3 with SE8000 DSP+)
- Improved DSP compressor for high dynamic range handling (much improved in V3)
- USB audio input for direct connection to PC or laptop
- XLR and RCA audio inputs
- Optional Ethernet IP audio streaming and remote control
- High quality ESD protected RF hardened balanced inputs
- Enough power for up to 10km of range with good antenna and location on a mountain top
- Includes coaxial cable, mains power supply and antenna!
It is never easy to predict range. Exact range depends a lot on terrain configuration, type of antenna and especially the location of the antenna, coaxial cable quality and length and
of course quality of receivers. Check this link to get a rough idea of factors involved.
1W or 5W, 15W, 25W CyberMaxFM+
SE transmitter with DSP stereo encoder (RDS can be ordered separately as an option)
- Mains power supply for the transmitter (may require your local mains cable, same as used for PC computer)
- Eco SE transmitter ships with sleeve dipole antenna (includes a mounting clamp), gain is roughly -1 dBd.
- 1W transmitter ships with sleeve dipole antenna (includes a mounting clamp), gain is roughly -1 dBd.
- 5-25W transmitter ships with wideband GP antenna (includes mounting material, clamps). No tuning is required, gain is roughly -1 dBd.
- 7m (20 feet) of coaxial cable with matching connectors installed for all antenna types
How is Eco different from regular SE 1H packages?
- These enclosures are not rack-mount and are a bit smaller than nano 1H.
They are 115mmx90mmx230mm (WxHxL).
The electronics inside is the same, the LCD display is the same.
- The audio inputs at the back are exactly the same
- The remote control is completely the same (RS232, USB)
- Antenna connector is N female
- It is not possible to install Ethernet inside (no space)
How do I wire up the transmitter, antenna and audio sources?
Look at the image below (click to enlarge) for an example of a nice radio station with some studio items. At the bottom of this page look for the links to other items that you can use to setup your radio station (WHAT ELSE WILL I NEED AND IT WASN'T INCLUDED? and WHAT CAN I USE AS AUDIO SOURCE?).
What parameters can I change via PC remote control?
Its best that you look at the screen capture below. The program may change over
time as we make enhancements, we will be adding more features soon! Feel free
to ask for any features you may want.
What is RDS?
Data System, basically it displays station name and sometimes song name
and similar information on a compatible radio receiver. Very popular in Europe,
less so in the US. Requires connection to a PC at the time of programming, but
retains settings even when powered off. RDS requires RDS upgrade option so be sure to add it, if you need
What is the Ethernet control module?
This optional add-on module lets you connect this FM transmitter to Ethernet. It lets you control frequency, power and RDS parameters from your PC remotely.
What is the Ethernet remote control with Barix audio streaming?
This optional add-on module lets you connect this FM transmitter to Ethernet. It lets you control frequency, power and RDS parameters from your PC remotely. It also allows you to stream IP audio to the transmitter with built-in Barix IP audio receiver.
Basic Studio (mixer and microphone)
Save yourself some time and get studio package as well. Basic studio package includes:
- 8-channel Behringer mixer (8 channels, 2 mic inputs with compressor, USB audio interface)
- Studio microphone with cable
- Microphone stand
Studio Package A
Save yourself some time and trouble and get studio package as well. Studio package A includes:
- AirLite USB mixer with Studio remote (8 channels, 3 mic inputs, 4 USB audio interface inputs and 1 VOIP input)
- 1x DJSTAR ECM-140 studio microphone
- 1x pro microphone stand
- Necessary cables (XLR etc) to connect mic, mixer and transmitter
Studio Package B
Save yourself some time and trouble and get studio package as well. Studio package B includes:
- AirMate USB mixer (8 channels, 3 mic inputs, 2 USB audio interface inputs and 2 telephone hybrid inputs)
- 2x DJSTAR ECM-140 studio microphone
- 2x pro microphone stand
- Necessary cables (XLR etc) to connect mic, mixer and transmitter
Need more studio gear?
Need audio processor? Check these.
Need a link from studio to the transmitter site? How about these.
Important: Due to large size and irregular shape of these packages the website often gets shipping cost wrong. For exact shipping cost please contact our sales department, be sure to give them your exact address and they will quote you shipping. It also does not hurt to ask for a special discount.
Also recommended: We recommend AA-230 antenna analyzer for checking SWR of the antennas. Grounding kits can be purchased here, they ensure lightning protection. They should be installed at the antenna (if needed, most dipoles are grounded anyway), at the tower base and at the point of entrance into transmitter building. Also use self-sealing tape which turns into rubber and protects against moisture from entering your connectors and coaxial cable.
WHAT CAN I USE AS AUDIO SOURCE?
- Your PC. Just plug audio cable into your sound card.
- CD player, MP3 player or any other music reproduction system
- Mixing board with microphone and other audio gear
WHAT ELSE WILL I NEED AND IT WASN'T INCLUDED?
- Requires mains cable, which can be purchased in your country (each country has a different mains plug and we don't carry all). This is standard cable used in your PC for example and its price is typically around 1 US$ or less. You can get it in any electronics store, such as radio shack, circuit city, any computer store etc. Mains cable simply plugs into the transmitter, just like it does with your PC, there is no soldering involved.
- Good taste for music and great skill to put together a program that will dazzle your listeners