Capacitors – feed-through

2,20$26,47$

In Stock
2,20$

In stock

7,71$

In stock

18,74$

In stock

26,47$

In stock

Prices shown are without VAT (paid only in EU)

Description

Feed-through capacitors provide a low impedance path to ground for high frequency signals. This allows any undesirable high frequency noise to bypass the functional circuit. In FM and TV broadcasting transmitters you can usually find these capacitors on all lines going into the amplifier section. They filter all of the signals ensuring that no RF can escape from the amplifier section and enter into usually more sensitive exciter/audio section.

Our advice: Always use these at least on the power line (usually +48) going from pallet to the power supply. Note they can take 20A max so use several, if needed. They must be installed in the wall between the amplifier section and power supply section of the transmitter. It is recommended that you use them on all lines going into the power amplifier section (+48V, SWR, PWR and bias disable). DO NOT use for RF input and output, of course.

 

Technical specifications 3000pF 25A 1000V 8mm hole:
Capacitance: 3000pF
Max current: 25A (use 2-3 for higher current)
Max voltage: 1000V
Capacitance tolerance: -0%, +100%
Operating range: -55degC,+85degC
Dimensions: 0.375″ Dia x 0.687″ L (9.5mm x 23mm)
Screw mount type, thread size 5/16″-32

Technical specifications 1500pF 20A 500V 5mm hole:
Capacitance: 1500pF
Max current: 20A (use 2-3 for higher current)
Max voltage: 500V
Capacitance tolerance: -0%, +100%
Operating range: -55degC,+85degC
Dimensions: 0.250″ Dia x 0.468″ L (6.35mm x 11.89mm)
Screw mount type, thread size 12-28, see photo below

Technical specifications 1000pF 20A 200V 3mm hole:
Capacitance: 1000pF
Max current: 20A (use 2-3 for higher current)
Max voltage: 200V
Capacitance tolerance: -0%, +100%
Operating range: -55degC,+125degC
Dimensions: 0.187″ Dia x 0.468″ L (4.75mm x 11.89mm)
Screw mount type, thread size 8-32, see photo below

Technical specifications 10A:
Capacitance: 1500pF
Max current: 10A (use 2-3 for higher current)
Max voltage: 200V
Capacitance tolerance: -0%, +100%
Operating range: -55degC,+125degC
Important: Designed to be soldered into PCB or metal sheet hole with diameter of 2mm
Chassis mount/solder type, no thread,  size 2.51 mm diameter x 16,5mm length

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.