Описание
Low-noise, quad channel GPSDO clock source 0.16 to 200 MHz
RigExpert Tokenblauser is a laboratory-grade, low-noise GNSS (GPS/Galileo) disciplined oscillator with four independent PLL-synthesized outputs. An addition, an auxiliary 10 MHz output in provided. All signals are 3.3V CMOS by default, with BNC connectors. The Tokenblauser is optimized to serve as a laboratory reference clock with 0.001 ppm (or better) stability, as well as for driving PLLs in RF/microwave/satellite applications.
Output: 0.16 to 200 MHz output (up to 350/710 MHz, depending on a PLL type).
Frequency control: from the LCD front panel or via USB connection to a PC, with 1 Hz step (very fine tuning is available with 1 ppt steps). Four memory profiles are available.
OEM opportunities: Use a 100×100 mm Tokenblauser module in your own product. Possible modifications include connecting external OCXO, GNSS receiver, using complimentary outputs with LVPECL/LVDS/HVSL/CMOS/SSTL/HSTL levels, etc. No programming skills are required. Source code and schematics are available for deeper modifications.
Included in the package:
– GPSDO in aluminum enclosure
– 12V power adapter (EU or US)
– GPS active antenna
- USB кабел
– User’s manual
However, Tokenblauser was designed to be also a versatile platform for experimenters. The device is Arduino-compatible, and the firmware is open-source. With no or minimal changes in the code or in the hardware, an advanced user may:
– Connect the GPSDO to a computer for debug purposes or data processing (such as plotting ADEV/MDEV graphs);
– Modify the firmware to experiment with different PLL and FLL algorithms;
– Use own GPS modules and GPS antennas;
– Use different types of OCXOs and Rubidium oscillators.
Гаранционно покритие от RigExpertCare™
RigExpert GPSDO TokenBlauser Specifications
Захранване: 9-12V, 1A max.
USB interface: USB 2.0, type B connector (device is not powered from USB); Virtual serial port compatible with Windows, Mac OS and Linux
GPS input: 3V active antenna with SMA connector; hardware modifiable for 5V antennas; reception of GPS, Galileo and BeiDou GNSS
Reference clock: One 10 MHz output (BNC); 3.3V CMOS levels, hardware modifiable for sinewave output; hardware modifiable for 5V CMOS levels
Arbitrary frequency clocks: Four outputs – A,B,C,D (BNC); independent frequency entry, 0.16 to 200 MHz in 1 Hz steps; 3.3V CMOS levels; hardware/ software modifiable for LVPECL/LVDS/HCSL/CMOS/SSTL/HSTL levels
User interface: 0.91” monochrome OLED; three front panel buttons; four frequency profiles for fast switching of output frequencies
Software compatibility: Arduino SAMD21 compatible; serial plotter supported in Arduino environment; debug output which can be analyzer by TimeLab and other software; transparent mode for direct access to the GPS module
Размери: Приложение: 105x105x35 mm; PCB: 100x100x25 mm
Experimenter’s corner: Tweak parameters of the GPSDO from the front panel; modify the firmware and upload to the device by using Arduino environment; use GPSDOs PCB as a module for your own device; replace built-in GPS module with external one; replace built-in OCXO with own OCXOs (rectangular or sinewave output) or Rubidium oscillator
Recycled/refurbished materials: OCXO
Вярваме, че имаме Най-добрите цени за тези единици. If you can find a better price for RigExpert products somewhere please Информирай ни, ние ще направим всичко възможно, за да победим цената им. Можете да поръчате, като превъртите до края на тази страница, ако сте базиран в ЕС клиент, имайте предвид, че ДДС не е включен. Регистрирани по ДДС компании в ЕС не плащат ДДС (свържете се с нас с вашия идентификационен код по ДДС).
Ние сме официален дистрибутор на RigExpert и поддържаме пълен сервизен център. Ние осигуряваме обслужване/ремонти за всички RigExpert продукти! Свържете се с нас за оферта.
Изграждане на усилватели, предаватели, филтри или друго RF оборудване? Ще ви трябват и тези:
Отзиви
Все още няма отзиви.