Tame your RF amp with this new Swiss-Knife Controller Board

Whatever make or model your current RF amplifier module might be, this controller board is sure to please you. It lets you monitor frequency, output power, SWR, supply voltage and temperature. Sounds impressive? The list goes on; it lets you control output power, set fan activation temperature and swr alarm level. Did I mention it also keeps track of uptime time so you can check if there was power outage and when it happened? And yes, it also provides LC-filtered 13-15V DC voltage for your optional exciter and fans.
Unit will soon also support remote monitoring via USB or RS232, this functionality will require a simple upgrade (plug-in IO board)!

Here is the English manual for the Control Board 2.0

Why is Control Board v2.0 so great?:
- Built-in frequency meter covering 50-300MHz (+/- 5KHz precision).
- Enables power adjustment from zero to full power (minimum is 5-10W with some amp modules).
- Supports up to 1KW modules (ask for more, if needed).
- Supports 24V or 48V mains power supply models.
- Provides 13-15V from either 24 or 48V (whatever you will use)
- Optional automatic FAN activation at adjustable temperature.
- RF EQ function (see manual).
- Power and SWR read-out.
- Uptime counter (hours, minutes).
- Remote monitoring available with easy upgrade

Technical specifications:
- Mains PSU output voltage: 20-55V
- Frequency meter: 50-300MHz, 5KHz accuracy
- Power readout range: 1KW max (ask for upgrade)
- On-Board uptime counter

What is included:
- Mains Power Supply, input 100-240V, output 24-28V or 48V
- Control Board V2.0
- LCD control module
- SWR/POWER pickup board

Control board works by varying supply voltage to the fm amplifier board. This requires modification of mains power supply which is why these units should only be purchased together with our mains power supply.