PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Top » Catalog » TV Transmitters » TV transmitter kits » My Account  |  Cart Contents  |  Checkout   
Our products
FM transmitters->
AM transmitters
Special sale items
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
  TV transmitter kits
  Rack mounted TV transmitters
  TV transmitter packages
  Digital tv transmitters
  PCS D&M digital TV transmitters
PC Transmitters
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components->
Software
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcasting->
RF service and design
What's New?
CYBERMAXTV+ SE 1000W UHF transmitter
CYBERMAXTV+ SE 1000W UHF transmitter
4,799.00EUR
Our Radio Guides
How To Start Guide
Frequently Asked Questions
Making Your Own Transmitter
Coaxial cable
Audio Equipment
Schematics
New Schematics
Wizards
Amplifiers
Antennas
Power Supply
Recommended Reading
Soldering
Testimonials
Information
About PCS Electronics
Shipping & Returns
Ordering
Support
Current Stock
Frequently asked questions
Forum
Contact Us
Distributors
Privacy Notice
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Vouchers
Gift Voucher FAQ
Safety Info


PayPal and credit cards accepted!
TVMAX6010V+ 10W VHF LO+HI TV TRANSMITTER  


10W, all analog TV standards supported, VHF band I and III

TVMAX5000+ was a great low-cost TV transmitter, but it had a few drawbacks. This is why we decided to bring out a new model based on technology similar to our FM exciter boards! Our new 10W VHF TV transmitter is your ticket into the world of TV. With support for remote directional coupler and RF power limit so you can build 100W, 200W, 500W or stronger TV transmitter. Build your own TV studio and broadcast your own TV program! Transmit movies from your PC to your living room, re-transmit the TV program you've never been able to receive in your valley, run a college TV station, cover rural areas of Africa with TV signal from satellite stations, run a hotel cable system info pages or just have fun... this unit will keep you busy during the cold winter evenings and is sure to provide lots of fun for many months to come!
Unit is available as a populated and tested board or a rack-mounted ready-to-use transmitter. Rack mounted unit runs from 20-48V DC from mains power adapter. Optional stereo encoder board plugs into the main transmitter board to provide stereo sound and DSP processing for NTSC. Up to 10W of output power offers from several hundred meters up to about 10km of range depending on antenna type used on transmitting and receiving side. High-gain yagis on both sides might offer even more range in favorable conditions.
Unit is rugged and comes with SWR protection, made for 24/7/365 operation. Each unit has a wide-angle high contrast back-lit LCD display. Output power and channel can now be adjusted via LCD module.

Look HERE for all manuals, drivers and support.

How is the TVMAX6010V+ different from the old and now obsolete TVMAX5010V?
- New LCD displays with rotary encoder and larger 4x16 type now supported
- Audio level displayed on the LCD
- Power level even over entire frequency band
- Improved on-board DCDC (works off 20-48V DC)
- LC video and audio filter for better picture/sound quality
- DIGIAMP interface for reading power, SWR, temp, current and voltage and for displaying it all on the LCD module
- Adjustable power limit (ALC) lets you limit amplifier output power, this is practical for driving big amplifiers (same technology as used in MAXPRO FM exciters)
- Power limit jumpers let you limit output power of exciter, this is practical for driving big amplifiers (1W, 2W, 4W, 8W)
- Slow power up ramp
- Power output equalized across the band
- New menu system, taken from our FM line (8015)

General features:
- Powered from 20-48V (requires 48V for full power)
- DSB AM modulation, universal all audio and TV standards
- Fits our new 19" 1H rack
- Built-in CPU for controlling and monitoring
- PC remote control via RS232, USB or Ethernet (requires IO board or ethernet expansion board)
- It can now read POWER and SWR from external directional coupler (DIGIAMP), it can also monitor amplifier temperature, voltage, current
- Adjustable TV channel (via LCD module with up/down keys)
- Easily adjustable TV and sound standard (via LCD module)
- Built-in test signal generator
- Supports all world TV standards: All PAL versions, SECAM, NTSC
- TV Channels: All VHF HIGH (175-225MHz in 125KHz steps)
- TV Channels: All VHF LOW (55-88MHz in 125KHz steps)
- SWR and TEMP protection
- Stereo sound possible with plug-in board (NTSC)
- Friendly user interface
- Output power: 10W typ, adjustable from 0 to Pmax via LCD display,
- Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
- Output connector BNC female ( rear panel )
- Frequency range: TV VHF band
- Audio connectors: RCA (cinch)
- Audio level: 1Vpp
- Video level: 1Vpp
- Audio input impedance: 10K resistive, unbalanced
- Pre-emphasis 50 or 75usec
- Regulated power supply: DC 20-48V/2A (more power at higher voltage)
- Weight: 0.8kg
- Dimensions: 100x125mm, same as TVMAX 5000+
- A fan is needed at all times (blowing across the board)

What is the DSP Stereo Encoder for USA/NTSC?
- This add-on card enables stereo sound, it was designed for NTSC system, used in USA and most of South/North America.

What is the external power/swr meter with DIGIAMP?
- This add-on card enables building strong TV transmitters, it is placed after an amplifier and makes it possible to show output power and swr on the LCD display of the transmitter. The add-on card connects to the TVMAX6000 via simple 14-pin DIGIAMP flat cable. Coming soon.

What is the USB IO board for?
- This add-on card lets you connect this transmitter to the PC via standard USB cable (not included). You can fully monitor transmitter via PC (power, frequency and other settings). 6-pin flat cable also connects BNC for Video and Audio inputs to TVMAX6000.

What is the Ethernet remote control module for?
- This add-on card lets you connect this transmitter to the PC via Ethernet network. You can control and monitor the status of your transmitter over Ethernet or Internet. Requires also USB IO board as it plugs into it.

What is the Predrilled LCD front panel?
- This is a square piece of aluminum with predrilled holes for LCD display, buttons and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the transmitter into a nice looking case (eliminates the hard work with the LCD).

Antenna options
You can check all our TV antennas here.
We have also provided a number of TV antennas with 5 meters of coaxial cable and installed connectors, they are all listed below. Of these antennas exterminator gives the most range, it only covers band III (175-225MHz).


To purchase coaxial cable and connectors for this transmitter look HERE.


This product was added to our catalog on Thursday 29 November, 2007.
 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.
Displaying 1 to 16 (of 16 products) Result Pages:  1 
    Name   Model   Select   Price 
TVMAX6000V+ 10W VHF HI+LO TV transmitter + basic (3-key) LCD  TVMAX6000V+ 10W VHF HI+LO TV transmitter + basic (3-key) LCD     199.99EUR  194.99EUR
Upgrade to 4x16 LCD with rotary button  Upgrade to 4x16 LCD with rotary button     18.99EUR
DSP Stereo Encoder for USA/NTSC  DSP Stereo Encoder for USA/NTSC     59.99EUR
3/4 ExterminatorII VHF HI 1KW + 5m coax  3/4 ExterminatorII VHF HI 1KW + 5m coax     149.99EUR
VHF LO GP TV antenna +5m cable with connector  VHF LO GP TV antenna +5m cable with connector     139.99EUR
VHF HI GP TV antenna +5m cable with connector  VHF HI GP TV antenna +5m cable with connector     139.99EUR
VHF HI DIPOLE TV antenna +5m cable with connector  VHF HI DIPOLE TV antenna +5m cable with connector     99.99EUR
IO board (USB+RS232+3xBNC) with 20cm 6-pin flat cable  IO board (USB+RS232+3xBNC) with 20cm 6-pin flat cable     39.99EUR
Ethernet remote control + cable (needs IO board w BNC)  Ethernet remote control + cable (needs IO board w BNC)     49.99EUR
Replacement BLF571 LDMOS final stage  Replacement BLF571 LDMOS final stage     59.99EUR
14-pin DIGIAMP flat cable (40cm, 2 connectors)  14-pin DIGIAMP flat cable (40cm, 2 connectors)     5.99EUR
Predrilled LCD front panel (3-key)  Predrilled LCD front panel (3-key)     4.99EUR
Pre-drilled LCD panel (rotary button 4x16)  Pre-drilled LCD panel (rotary button 4x16)     4.99EUR
Software+USB IOBOARD for changing logo  Software+USB IOBOARD for changing logo     39.99EUR
Switch with LED diode  Switch with LED diode     2.99EUR
Transmitter keylock (optional)  Transmitter keylock (optional)     6.99EUR
Displaying 1 to 16 (of 16 products) Result Pages:  1 
Shopping Cart
0 items
Quick Find
 

Use keywords to find the product you are looking for.
Our newsletter

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Announcements
Visit Our Forum
Last posts:

Click to enter forum
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Currencies
   

Other currencies

Contact Us | About PCS Electronics | Support | Frequently asked questions | How To Start Guide | Shipping & Returns
Show prices In US$ | Show prices In EUR | Manuals, software and support

All text on this site, product descriptions, guides and scripts
Copyright © by PCS Elektronik d.o.o.
Powered by osCommerce