PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Arriba » Catálogo » Stereo encoders » Mi cuenta  |  Contenido del carrito  |  Procesar pedido   
Nuestros productos
Special sale items
FM transmitters->
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
PC Transmitters
TV amplifiers->
TV antennas
Coaxial cable and connectors
Enlaces audio/video
RDS Encoders
Stereo encoders
Instruments
Electronic components->
Software
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcasting->
AM transmitters
RF service and design
Novedades
12pF ±5% 500V NPO .11 X.11 (2.8x2.8mm)
12pF ±5% 500V NPO .11 X.11 (2.8x2.8mm)
0.99EUR
Nuestras guías de radio
Guía Cómo empezar
Preguntas más frecuentes
Making Your Own Transmitter
Cable coaxial
Equipo de audio
Esquemas
Nuevos esquemas
Asistentes
Amplificadores
Antenas
Fuente de alimentación
Lecturas recomendadas
Soldadura
Testimonios
Información
Acerca de PCS Electronics
Envíos y devoluciones
Pedidos
Soporte
Stock actual
Frecuentas más frecuentes
Foro
Póngase en contacto con nosotros
Distribuidores
Aviso de privacidad
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Vales
Preguntas más frecuentes (FAQ) sobre los vales de regalo
Información de protección


PayPal and credit cards accepted!
SE7000 DSP+ stereo encoder with 114x oversampling  


New stereo encoder series with impressive 114x oversampling

SE7000 series stereo encoders feature a number of big enhancements and raise the bar considerably for stereo separation and audio excellence. The amazing sonic purity and clarity are sure to impress you. The new MPX multiplexer circuit is 114x oversampled and gives better stereo separation than anything else in its price range. Additional digital audio input completely eliminates any ground-loop problems. The new SE7000 series stereo encoder is an improved SE6000 DSP+ design. You can read about the differences between the two models below:

Model DSP+
- Stereo encoder with DSP audio processor
- DSP technology with new better compressor and limiter
- Pre-emphasis and pilot level now adjustable from LCD display
- Digital audio inputs (USB)
- Extremely sharp low pass filters with deep 19KHz notch
- Can be connected to our MAX PRO 6000/7000/8000 series FM exciters and controlled from its LCD module (or its own LCD module).
- Precision LC filtered MPX output signal

You can find the manual for this (and other products) here.

How are SE7000 DSP+ better than SE6000 DSP+
- Further improved stereo separation due to DC offset adjustment trimmer
- Replaced telemetry with actual old-school RS232 port
- Fixed a number of bugs so the boards are shiny and error free
- New RDS IO board with a number of fixes also available
- Integrated IO board also supports Ethernet now

Can I upgrade my SE6000 DSP+ with new stereo encoder?
Yes, it is a drop-in replacement. Same size, same holes. Only the RS232 connector is now on the main board and not on the RDS IO board.

Technical specifications:
- Audio Response: 10Hz-15KHz, DSP or LC filtered (as per CCIR standards)
- DSP: 24-bit Digital Signal Processor, Analog: LC filters
- 19KHz notch filter, >-60 dB typ
- Precise pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, balanced or unbalanced
- Audio Input Level: 0 dB
- Distortion: <0.1%
- S/N ratio: >80 dB
- Separation: >60 dB typ. (more than any radio receiver you can buy on the market)
- Pilot Frequency: 19 KHz, 114x oversampled MPX
- Output Impedance: 75 Ohms
- Power Requirements: 12-15VDC / 160-200mA
- PC Board Size: 100x110mm
- Audio connectors: all RCA jacks are mounted on the board, 3-pin jumpers for XLR balanced inputs, optional MCX or solder pads for MPX output
- Power connector: solder pads
- Output level: Ueff 1-4V adjustable with trimmer

What is the RDSIO7000+ board?
This is a plug-in upgrade board for SE7000. It is simply plugged into it. Once connected the SE7000+ gains these new functions:
- RDS (Radio Data System)
- Remote control via PC (if used with MAXPRO6000/7000/8000 series FM exciter), you can now connect USB cable to PC and set all parameters for FM transmitter remotely.
- Two XLR audio inputs
- Three BNC connectors (MPX out, MPX in and 19KHz TTL out). This photo shows it very nicely.


 

 



Este producto se añadió a nuestro catálogo el Monday 24 April, 2017.
 *Por favor, seleccione la cantidad de cada artículo que desea encargar y pulse el botón 'Añadir al carrito' a continuación.
Mostrando de 1 hasta 6 (de 6 productos) Páginas de resultados:  1 
    Nombre+   Modelo   Efectuar la selección   Precio 
30cm Maxlink/I2C cable (FM exciter to stereo encoder)  30cm Maxlink/I2C cable (FM exciter to stereo encoder)     2.99EUR
30cm RS232 cable for SE7000  30cm RS232 cable for SE7000     2.99EUR
Big blue 4x16 LCD display w button (SE7000DSP)  Big blue 4x16 LCD display w button (SE7000DSP)     39.99EUR
Blue 2x16 LCD display w button (SE7000DSP)  Blue 2x16 LCD display w button (SE7000DSP)     34.99EUR
RDSIO7000+ RDS and IO board  RDSIO7000+ RDS and IO board     99.99EUR
SE7000 DSP+  SE7000 DSP+     119.99EUR
Mostrando de 1 hasta 6 (de 6 productos) Páginas de resultados:  1 
Carrito de la compra
0 artículos
Búsqueda rápida
 

Use palabras clave para encontrar el producto que está buscando.
Notificaciones

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Anuncios
Visite nuestro foro
Últimos artículos:

Pulse para entrar al foro
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Moneda
   

Otras monedas

Póngase en contacto con nosotros | Acerca de PCS Electronics | Soporte | Frecuentas más frecuentes | Guía Cómo empezar | Envíos y devoluciones
Todos precios en US$ | Todos precios en EURO | Manuales, software y soporte

Todo el texto de este sitio, las descripciones de los productos, las guías y guiones son
Copyright © de PCS Elektronik d.o.o.
Basado en osCommerce